Tag: M.W:200-300

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 128453-98-5, name is 4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows. 128453-98-5

To a solution of N-Boc thiomorpholine carboxylic acid (1.36 g, 5.51 mmol) in dichloromethane (13.6 ml) were added under N2, at r.t., TBTU (1.95 g, 6.06 mmol) and DIPEA (1.92 ml, 11.02 mmol) and the solution was stirred for 30 mins. To a suspension of L-serine methyl ester hydrochloride (1.71 g, 11.02 mmol) in dichloromethane (13.6 ml) was added DIPEA (1.92 ml, 11.02 mmol) and the resulting solution was stirred for 30 mins. Then the solution containing the serine free base was added to the reaction mixture and it was left stirring for 16 hrs. Water was added to the reaction mixture and the aqueous layer was extracted with dichloromethane (x3) and the combined organic phases were dried (Na2SO4) and evaporated to dryness. The crude title compound (3.87 g) was used in the next step without further purification. UPLC/MS: m/z= 371 (M+Na); 349 (M+1 ); 293 (M-fBu); 249 (M-BOC+1 ) (at) t=0.59 min

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 128453-98-5, we look forward to future research findings about .

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/28654; (2007); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 134676-67-8, name is N-Boc-2-thiomorpholinecarboxylic Acid. This compound has unique chemical properties. The synthetic route is as follows. 134676-67-8

Synthesis of Example 32 Thiomo holine-2,4-dicarboxylic acid 4-tert-butyl ester (10 g, 40.43 mmol) is dissolved in a mixture of dichloromethane (50 mL) and methanol (40 inL) and cooled to 0 C under N2. A solution of trimethylsilyldiazomethane (2M in diethyl ether, 44.5 mL, 89 mmol) is added dropwise with stirring, the mixture allowed to warm to room temperature and stirred overnight. The solvent is removed under vacuum, the residue dissolved in ethyl acetate and washed with water, dried over magnesium sulphate and the solvent removed under vacuum to give compound 32-1.Yield: 10.5 gES mass spectrum: [M+H-tBu]+ = 206Retention time HPLC : 1.76 min (UPLC Method 1 ), 134676-67-8

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 134676-67-8, we look forward to future research findings about .

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; GIOVANNINI, Riccardo; HAMPRECHT, Dieter; KISTLER, Barbara; LINGARD, Iain; WO2012/80456; (2012); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 114525-81-4, name is (R)-4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows. 114525-81-4

To a 25mL round bottom flask, Intermediate 7 (540 mg, 1.45 mmol), Intermediate 9 (359 mg, 1.45 mmol), EDCI (418 mg, 2.18 mmol), HOBt (294 mg, 2.18 mmol), DIEA (374 mg, 2.9 mmol) and tetrahydrofuran (9 mL) were added, and stirred at room temperature overnight. Thereafter, the reaction product was subjected to vacuum distillation for removal of solvent, dissolved with water, and extracted 3 times with ethyl acetate. The extracts were combined, washed 3 times with saturated brine, concentrated, and separated through a silica gel column (eluent: petroleum ether/ethyl acetate), to give 688 mg of a white foamy solid product, yield 78.8%. [0081] 1H-NMR (400 MHz, CDCl3) delta ppm: 7.42 (1H, d, J = 1.12 Hz), 7.27 (2H, m), 5.75 (1H, s), 5.19 (1H, s), 4.58 (2H, s), 3.95-3.44(10H, brm), 3.12 (1H, m), 2.82 (2H, m), 2.43 (2H, m), 1.92 (9H, s); EI-MS (m/z): 601.1 [M+H]+., 114525-81-4

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Reference£º
Patent; Institute of Pharmacology and Toxicology Academy of Military Medical Sciences P.L.A. China; Peking University; LI, Song; WANG, Ying; XIAO, Junhai; MA, Dalong; GONG, Hongwei; QI, Hui; WANG, Lili; LING, Xiaomei; ZHENG, Zhibing; ZHANG, Yang; ZHONG, Wu; LI, Meina; XIE, Yunde; XU, Enquan; LI, Xingzhou; MA, Jing; ZHAO, Guoming; ZHOU, Xinbo; WANG, Xiaokui; LIU, Hongying; EP2805947; (2014); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 864685-25-6, name is 3-(3-Chlorophenyl)thiomorpholine. A new synthetic method of this compound is introduced below. 864685-25-6

Example 297 3-[1-(ethylsulfonyl)-4-piperidinyl]-5-[3-(3-thiomorpholinyl)phenyl]-1H-indole-7-carboxamide trifluoroacetate To a solution of 3-[1-(ethylsulfonyl)-4-piperidinyl]-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)-1H-indole-7-carboxamide (60 mg, 0.13 mmol) in dioxane (1.5 mL) and water (0.5 mL) was added 3-(3-chlorophenyl)thiomorpholine (84 mg, 0.39 mmol) and potassium carbonate (107.6 mg, 0.78 mmol). This mixture was degassed for 5 min then tetrakis(triphenylphosphine)palladium(0) (14.0 mg, 0.013 mmol) was added. The resulting mixture was reacted in a microwave for 30 min at 160 C. The solid was filtered off and all solvents were evaporated. The resulting solution was re-dissolved in dichloromethane and separator was used to remove water. The mixture was concentrated to give organic solvent and then purified by Gilson Preparatory HPLC to give 7.4 mg of the title compound (11%). LC/MS=m/z 513.4 [M+H] Ret. Time: 1.54

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 864685-25-6, we look forward to future research findings about .

Reference£º
Patent; Deng, Jianghe; Kerns, Jeffrey K.; Jin, Qi; Lin, Guoliang; Lin, Xichen; Lindenmuth, Michael; Neipp, Christopher; Nie, Hong; Thomas, Sonia M.; Widdowson, Katherine L.; US2009/143372; (2009); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 134676-67-8, name is N-Boc-2-thiomorpholinecarboxylic Acid. A new synthetic method of this compound is introduced below. 134676-67-8

T3P (3.61 mL, 6.07 mmol) was added to a solution of 4-amino-2-chlorobenzonitrile (370 mg, 2.43 mmol), 4-(tert-butoxycarbonyl)thiomorpholine-2-carboxylic acid (500 mg, 2.02 mmol), DIEA (1.76 mL, 10.11 mmol) and DMAP (272 mg, 2.22 mmol) in ethyl acetate (10 mL) at room temperature, and the mixture was heated at 60C overnight. The reaction mixture was concentrated under reduced pressure, and the residue was purified by silica gel column chromatography (solvent gradient; 5?60% ethyl acetate/hexane) to give tert-butyl 2-((3-chloro-4-cyanophenyl)carbamoyl)thiomorpholine-4-carboxylate (765 mg, 2.003 mmol, 99%) as an orange oil. 1H NMR (300 MHz, CDCl3):delta 1.38-1.55(9H,m), 2.46-2.64(1H,m), 2.74-2.87(1H,m), 3.34-3.52(2H,m), 3.65(1H,dd,J=14.2,2.8 Hz), 4.03-4.17(1H,m), 4.60(1H,dd,J=14.2,4.0 Hz), 7.60(2H,d,J=3.8 Hz), 7.94(1H,s), 9.14(1H,brs)., 134676-67-8

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 134676-67-8, we look forward to future research findings about .

Reference£º
Patent; Takeda Pharmaceutical Company Limited; YAMAMOTO, Satoshi; SHIRAI, Junya; ODA, Tsuneo; IMADA, Takashi; KONO, Mitsunori; SATO, Ayumu; TOMATA, Yoshihide; OCHIDA, Atsuko; ISHII, Naoki; SASAKI, Yusuke; FUKASE, Yoshiyuki; YUKAWA, Tomoya; FUKUMOTO, Shoji; (200 pag.)EP3192791; (2017); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 114525-81-4, name is (R)-4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows. 114525-81-4

(Scheme F, F-3: where RF-1 and RF-2 are the same and equal to proton, RF-3 is t-butyl, R5 is 4-[(2,6-dichlorobenzoyl)amino]phenyl and stereochemistry is (R,S)). [C00180] [00425] To a cooled (0-5 C.) solution of Boc-L-thiomorpholine-3-carboxylic acid (Scheme F, F-1: where RF-1 and RF-2 are the same and equal to proton and stereochemistry is (R)) (1.34 g, 5.4 mmol) in methylene chloride (20 mL) was added HOBt (800 mg, 5.94 mmol), DMAP (140 mg, EDC (1.14 g, 5.94 mmol) and triethylamine (2.7 mL, 19.4 mmol). After 10 min, F-2 (Scheme F where RF-1 and RF-2 are the same and equal to proton, RF-3 is t-butyl, R5 is 4-[(2,6-dichlorobenzoyl)amino]phenyl and stereochemistry is (S)) (2.02 g, 4.94 mmol) was added, the reaction allowed to warm to ambient temperature and stirred for 24 h. Volatiles were removed in vacuo and the residue partitioned between methylene chloride and 2.5% aqueous HCl. The organic layer was separated and washed with sat. aqueous NaHCO3, dried and concentrated in vacuo. Purification of the residue by flash chromatography using methylene chloride/ethyl acetate (5%) as eluant afforded the title compound (1.64 g): IR (mull) 1730, 1687, 1667, 1606, 1538, 1515, 1431, 1412, 1395, 1320, 1294, 1258, 1250, 1194, 1158 cm-1; 1H NMR (300 MHz, CDCl3) delta 1.44 (9H), 1.46 (9H), 2.35 (1H), 2.67 (3H), 3.22 (3H), 4.25 (1H), 4.73 (1H), 4.97 (1H), 6.52 (1H), 7.29 (5H), 7.53 (3H); MS (FAB) m/z (rel. intensity) 638 (M+H, 2), Anal. Calcd for C30H37Cl2N3O6S: C, 56.42; H, 5.84; N, 6.58. Found: C, 56.13; H, 5.98; N, 6.58.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Reference£º
Patent; Pharmacia & Upjohn Company; Tanabe Seiyaku Co., Ltd.; US6685617; (2004); B1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 128453-98-5

Boc protected thiomorpholine carboxylic acid (3.1g, 13mmol), HOBt (2.1g, 16mmol) and EDCI hydrochloride (3.7g, 20mmol) dissolved in DMF(20ml) was added 28% of ammonium hydroxide solution (4.5g, 130mmol) at RT. After 4h, the reaction mixture was poured into saturated water solution of NaHCO3 and diluted with EtOAc, washed with sat’d NaHCO3 and brine. The organic layer was dried (Na2S04) and concentrated. The crude product was purified by flash chromatography on silica gel with EA/Hex to give .23g of amide. 1H-NMR (400 MHz, CDCI3j delta 5.2 (d, 1 H),6.15 (br., 1 H), 5.68 (br., 1 H), 5.02(br., 1 H), 4.25 (br., 1 H), 3.16(d, 1 H), 2.8 (m, 1 H), 2.7 (t, 1 H), 2.4 (d, 1 H), 1.47 (s, 9H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 128453-98-5. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; GILEAD SCIENCES, INC.; CAI, Zhenhong, R.; DU, Zhimin; JI, Mingzhe; JIN, Haolun; KIM, Choung, U.; MISH, Michael, R.; PHILLIPS, Barton, W.; PYUN, Hyung-jung; SHENG, Xiaoning, C.; WU, Qiaoyin; ZONTE, Catalin, Sebastian; WO2011/156610; (2011); A2;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

3-(3-Chlorophenyl)thiomorpholine, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 864685-25-6

Example 297: 3-ri-fethylsulfonyl)-4-piperidinv?-5-r3-(3-thiomorphoiinyl)phenv?-1 H- indole-7-carboxamide trifluoroacetate; To a solution of 3-[1 -(ethylsulfonyl)-4-piperidinyl]-5-(4,4,5,5-tetramethyl-1 ,3,2- dioxaborolan-2-yl)-1 H-indole-7-carboxamide (60 mg, 0.13 mmol) in dioxane (1.5 mL) and water (0.5 mL) was added 3-(3-chlorophenyl)thiomorpholine (84 mg, 0.39 mmol) and potassium carbonate (107.6 mg, 0.78 mmol). This mixture was degassed for 5 min then tetrakis(triphenylphosphine)palladium(0) (14.0 mg, 0.013 mmol) was added. The resulting mixture was reacted in a microwave for 30 min at 160 C. The solid was filtered off and all solvents were evaporated. The resulting solution was re-dissolved in dichloromethane and separator was used to remove water. The mixture was concentrated to give organic solvent and then purified by Gilson Preparatory HPLC to give 7.4 mg of the title compound (11 %). LC/MS = m/z 513.4 [M+H] Ret. Time: 1.54

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 864685-25-6. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/5534; (2007); A2;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 114525-81-4, name is (R)-4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 114525-81-4

Trifluoroacetic acid (4 mL, 23.5 mmol) was added to a stirred solution of (R)-4-(tert- butoxycarbonyl)thiomorpholine-3-carboxylic acid (1.0 g, 4.05 mmol) in CH2CI2 (20 mL), and the reaction mixture was stirred at room temperature for 2 h. Volatile byproducts were removed at reduced pressure and the residue was concentrated from toluene (2 x 20 mL) and dried under high vacuum for 30 min. The crude residue was dissolved in 1,4-dioxane (10 mL) and water (10 mL) was added followed by NaHCC (1.02 g, 12.15 mmol) and a solution of FMOC-C1 (1.04 g, 4.05 mmol) in 1,4-dioxane (10 mL). The reaction mixture was stirred at room temperature for 16 h. The mixture was concentrated under reduced pressure to remove volatile organic solvent and the residue was washed with MTBE (2 x 20 mL). The aqueous layer was acidified with IN aqueous HC1 to pH 2 and extracted with EtOAc (3 x 50 mL). The combined organic extracts were washed with brine solution (50 mL), dried over anhydrous a2S04, filtered and concentrated. The residue was purified by reverse phase column chromatography (CI 8; eluent: 10-100% acetonitrile/water) to afford the title compound (1.00 g) as a white semi-solid.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Reference£º
Patent; MERCK SHARP & DOHME CORP.; BLIZZARD, Timothy Allen; BIFTU, Tesfaye; WO2013/148478; (2013); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 114525-81-4, name is (R)-4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows. 114525-81-4

To a 100 mL round bottom flask, Intermediate 15 (1.28 g, 3.28 mmol), Intermediate 9 (0.81 g, 3.28 mmol), EDCI (0.94 g, 4.92 mmol), HOBt (0.66 g, 4.92 mmol), DIEA (0.85 g, 6.56 mmol) and tetrahydrofuran (40 mL) were added, and stirred at room temperature overnight. Thereafter, the reaction product was subjected to vacuum distillation for removal of solvent, dissolved with water, and extracted 3 times with ethyl acetate. The extracts were combined, washed 3 times with saturated brine, concentrated, and separated through a silica gel column (eluent: ethyl acetate/methanol/ammonia), to give 1.63 g of a white foamy solid product, yield 80.5%.1H-NMR (400 MHz, CDCl3) delta ppm: 8.77 (1H, m), 8.02 (1H, m), 7.43 (1H, m), 7.31 (1H, m), 7.20 (1H, m), 7.05 (1H, m), 6.56 (1H, m), 4.85 (2H, d, J=5.2 Hz), 4.02-3.44 (10H, brm), 3.13 (1H, m), 2.83 (2H, m), 2.44 (2H, m), 2.02 (9H, s); EI-MS (m/z): 618.2 [M+H]+.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Reference£º
Patent; Li, Song; Wang, Ying; Xiao, Junhai; Ma, Dalong; Gong, Hongwei; Qi, Hui; Wang, Lili; Ling, Xiaomei; Zheng, Zhibing; Zhang, Yang; Zhong, Wu; Li, Meina; Xie, Yunde; Xu, Enquan; Li, Xingzhou; Ma, Jing; Zhao, Guoming; Zhou, Xinbo; Wang, Xiaokui; Liu, Hongying; US2015/126500; (2015); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem