Tag: M.W:100-200

Adding a certain compound to certain chemical reactions, such as: Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 39093-93-1,the Thiomorpholine, compound., 39093-93-1

4-bromomethylboronic acid pinacol ester 50.00 g (16.84 mmol), 1,1-dioxide thiomorpholine 27.36 g (20.24 mmol), potassium carbonate 27.92 g (20.20 mmol) were added to the reaction flask,250ml of N,N-dimethylformamide was added and the reaction was stirred at 80C for 4h.After cooling to room temperature, the reaction solution was poured into 1250 ml of ice water, stirred for 30 minutes, and the title product was collected by suction filtration. The white solid was 47.2 g. The yield was 79.7%., 39093-93-1

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; China Pharmaceutical Research And Development Center Co., Ltd.; Yin Huijun; Yan Xu; Zong Libin; Dong Liuxin; Han Yachao; Xi Qingchuan; Dou Haoshuai; Mi Zhen; Yang Yan; (30 pag.)CN107880038; (2018); A;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.76176-87-9, Thiomorpholine-1-oxide hydrochloride it is a common compound, a new synthetic route is introduced below., 76176-87-9

To a solution of 6-chloro-3-pyridazinecarboxaldehyde (1) (502 mg, 3.52 mmol, 1.0 eq) in 1 ,2-dichloroethane (4 ml_) was added NaOAc (722 mg, 8.80 mmol, 2.5 eq) followed by CH2CI2 (2 ml_) and thiomorpholine-1 -oxide hydrochloride (2) (1.37 g, 8.80 mmol, 2.5 eq). The mixture was stirred for 10 min before the addition of NaBH(OAc)3 (1.12 g, 5.28 mmol, 1.5 eq) then stirred for 4 h at room temperature. The reaction was quenched with 1 M NaOH (5 ml_) and the resulting mixture was poured into H20 (10 ml_) and extracted with CH2CI2 (10 ml_) then EtOAc (2 x 10 ml_). The combined organic extracts were dried over MgS04, filtered and concentrated in vacuo. Purification by silica gel chromatography using CH2CI2/MeOH (1 :0-19: 1 ) yielded intermediate 3 as an off- white solid (408 mg, 47%). (1335) LCMS (ES): Found 245.9 [M+Hf. (1336) 1H NMR (300MHz, DMSO-cf6), d: 7.91 (d, J=8.9 Hz, 1 H), 7.81 (d, J=8.9 Hz, 1 H), 3.89 (s, 2H), 2.82-3.04 (m, 4H), 2.59-2.79 (m, 4H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 76176-87-9, and friends who are interested can also refer to it.

Reference£º
Patent; KARUS THERAPEUTICS LIMITED; SHUTTLEWORTH, Stephen Joseph; GATLAND, Alice Elizabeth; FINNEMORE, Daniel John; ALEXANDER, Rikki Peter; SILVA, Franck; CECIL, Alexander; (233 pag.)WO2019/166824; (2019); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 59801-62-6, name is Thiomorpholine 1,1-dioxide hydrochloride. A new synthetic method of this compound is introduced below. 59801-62-6

After 158 mg of cis-(+)-2-(4-Bromomethylbenzyl)-4-(3,4-dimethoxyphenyl)-4a,5,8,8a-tetrahydro-2H-phthalazin-1 -one obtained in the step 1 in Example 2-1 was dissolved in 20 mL of N,N-Dimethylformamide, 1.10 g of 1,1,-Dioxidothiomorpholine hydrochloride and 1.77 g of Potassium carbonate were added thereto and then the reaction liquid was stirred at room temperature for 9 hours. Water was added to the reaction liquid, and the reaction liquid was subjected to extraction procedure with ethyl acetate. The organic layer was washed with water and saturated saline and dried with anhydrous Magnesium sulfate, and the solvent was evaporated in vacuo. The crude product was purified through silica gel column chromatography to obtain 827 mg of the objective compound as a white amorphous substance. 1H-NMR(CDCl3) delta: 1.9-2.3(3H,m), 2.83(1H,t), 2.9-3.1(9H,m), 3.35(1H,ddd), 3.61(2H,s), 3.92(3H,s), 3.93(3H,s), 5.02(2H,dd), 5.73(2H,m), 6.86(1H,d), 7.2-7.3(3H,m), 7.36(2H,d), 7.46(1H,d) Specific rotation [alpha]D25 = 418.59 (c = 1.0, chloroform)

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 59801-62-6, we look forward to future research findings about .

Reference£º
Patent; Nippon Shinyaku Co., Ltd.; EP1873147; (2008); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 59801-62-6, name is Thiomorpholine 1,1-dioxide hydrochloride. A new synthetic method of this compound is introduced below. 59801-62-6

A mixture of 3-[2-amino-4-(4-chlorophenyl)-5-thiazolyl]propionic acid (2.67 g), diethyl cyanophosphate (1.69 g), thiomorpholine-1,1-dioxide hydrochloride (1.62 g), triethylamine (2.9 ml) and N,N-dimethylformamide (40 ml) was stirred at room temperature for 3 hrs. The reaction mixture was poured into water, extracted with ethyl acetate, washed with 0.1N aqueous sodium hydroxide solution and water, dried over anhydrous magnesium sulfate and concentrated. The precipitated solid was collected by filtration to give 4-{3-[2-amino-4-(4-chlorophenyl)-5-thiazolyl]propanoyl]thiomorpholine-1,1-dioxide as a colorless powder. Recrystallization from ethanol-isopropyl ether gave colorless prism crystals. melting point: 220-222C.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 59801-62-6, we look forward to future research findings about .

Reference£º
Patent; Takeda Chemical Industries, Ltd.; EP1486490; (2004); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

20196-21-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Thiomorpholin-3-one, cas is 20196-21-8,the Thiomorpholine compound, it is a common compound, a new synthetic route is introduced below.

Preparation 6 4-Benzylthiomorpholin-3-one Under a nitrogen atmosphere in a flame-dried flask, sodium hydride (4.65 g, 0.1 05 mol, 54% oil dispersion) was added to 150 mL of anhydrous dimethylformamide (DMF), and the suspension was cooled to 0 C. Thiomorpholin-3-one (11.7 g, 0.1 mol) was added in portions over 30 minutes with stirring. After gas evolution had stopped (ca. 30 minutes), benzyl chloride (12.1 g, 0.105 mol) in DMF (50 mL) was added and stirring was continued at room temperature overnight. The reaction was then warmed to 80 C. for 15 minutes and cooled. Water (250 mL) was added and the mixture was extracted with chloroform which was dried (MgSO4) and concentrated in vacuo to an oil. The oil was triturated with ethyl ether (Et2O) and cooled by dry ice to give the product, 12.75 g as a solid, m.p. 60-62 C. Recrystallization of 5 g from 100 mL of Et2O gave 3.5 g of pure product, m.p. 62-63 C. along with a second crop of 0.75 g with m.p. 62-63 C.

If you are interested in these compounds, 20196-21-8, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; Gibbs, Megan Ann; Howard, Harry Ralph; Sprouse, Jeffrey Scott; Schachter, Joel Barry; Chappell, Phillip Branch; US2002/49214; (2002); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 39093-93-1, name is Thiomorpholine 1,1-dioxide. This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 39093-93-1

Example 5; l-(5-tert-Butyl-3-(thiomorpholine-l,l-dioxide-4-carbonyl)thiophen-2-yl)-3-(4-(2- (methylcarbamoyl)pyridin-4-yloxy)phenyl)urea [0228] To a solution of 6-tert-butyl-l/f-thieno[2,3-cTj[l,3]oxazine-2,4-dione (3.7 g, 15 mmol) in dioxane (30 mL) was added 4-(4-aminophenoxy)-N-methylpicolinamide (3.4 g, 14 mmol), and the reaction mixture was heated at 90 0C for 4 h. The volatiles were evaporated under reduced pressure to give the crude product which was used in the next step without further purification. EPO [0229] To a solution of 5-tert-butyl-2-(3-(4-(rhoyridin-4-yloxy)rhohenyl)ureido)thiorhohene-3- carboxylic acid (ca 14 mmol) in THF (70 mL) were added thiomorpholine 1,1 -dioxide (2.27 g, 16.8 mmol, 1.2 eq), HOBt (2.08 g, 15,4 mmol, 1.1 eq), EDCI (3.22 g, 16.8 mmol, 1.2 eq), and the mixture was stirred at room temperature for 16 h. The volatiles were evaporated under reduced pressure to give the crude product which was extracted with saturated sodium bicarbonate (3 x 40 mL) and ethyl acetate (150 mL). The organic layer was dried and diluted with ethanol (40 mL). Upon concentration of the solution using rotary evaporator, precipitation of solid occurred. The solid was digested with ethanol (70 mL), filtered, washed with ethanol to give the product which was dried under vacuum at 70 0C for 24 h. (yield = 7.2 g, 82percent). 1H NMR (400 MHz, DMSOd6) delta 9.89 (s, IH), 9.63 (s, IH), 8.73 (m, IH), 8.47 (d, J = 6.8 Hz, IH), 7.54 (d, J = 8.8 Hz, 2H), 7.35 (d, J = 2.8 Hz, IH), 7.13 (d, J = 8.8 Hz, 2H), 7.11 (m, IHO, 6.65 (s, IH), 3.93 (m, 4H), 3.27 (m, 4H), 2.75 (d, J = 5.2 Hz3 3H), 1.30 (s, 9H).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; LOCUS PHARMACEUTICALS, INC.; MOORE, JR., William, R.; SPRINGMAN, Eric; MICHELOTTI, Enrique; WO2006/62984; (2006); A2;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 39093-93-1, name is Thiomorpholine 1,1-dioxide. This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 39093-93-1

Step 1. Preparation of (S)-benzyl 4-((lR,3aS,5aR,5bR,7aR,l laS,l lbR,13aR,13bR)-3a- ((2-( 1 , 1 -dioxidothiomorpholino)-2-oxoethyl)amino)-5 a,5b,8, 8, 11 a-pentamethyl- 1 -(prop- l-en-2-yl)-2,3,3a,4,5,5a,5b,6,7,7a,8,l l,l la,l lb,12,13,13a,13b-octadecahydro-lH- cyclopenta[a]chrysen-9-yl)-l-(fluoromethyl)cyclohex-3-enecarboxylate. In a 1 dram vial with PTFE lined screw cap were combined 2- (((lR,3aS,5aR,5bR,7aR,l laS,l lbR,13aR,13bR)-9-((S)-4-((benzyloxy)carbonyl)-4- (fluoromethyl)cyclohex- 1 -en- 1 -yl)-5a,5b, 8, 8, 11 a-pentamethyl- 1 -(prop- 1 -en-2-yl)- 2,3,3a,4,5,5a,5b,6,7,7a,8,l l,l la,l lb,12,13,13a,13b-octadecahydro-lH- cyclopenta[a]chrysen-3a-yl)amino)acetic acid, TFA (0.025 g, 0.030 mmol) with thiomorpholine 1,1-dioxide (10.20 mg, 0.075 mmol) and HATU (0.029 g, 0.075 mmol) in THF (1 mL). To the mixture was added DIPEA (0.026 mL, 0.151 mmol), and the resulting solution was agitated overnight at rt. The crude mixture was purified by reverse phase preparative HPLC (Prep HPLC Method 16) to give the product (0.0269 g, 94percent yield) as a white powder TFA salt. LCMS: m/z 831.5 (M+H)+, 2.50 min (method 1).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; SIT, Sing-Yuen; CHEN, Yan; CHEN, Jie; SWIDORSKI, Jacob; VENABLES, Brian Lee; SIN, Ny; MEANWELL, Nicholas A.; REGUEIRO-REN, Alicia; HARTZ, Richard A.; XU, Li; LIU, Zheng; WO2015/157483; (2015); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 39093-93-1

Synthesis of the Compound of the Invention and Comparative ExamplesCompound 1 (the Compound of the Invention); Step 1: 2-(4-Bromomethyl-phenyl)-4,4,5,5-tetramethyl-[1,3,2]dioxaborolane (1 eq) and DIPEA (2 eq) were dissolved in DCM/MeOH (5:1 v:v) under N2 and thiomorpholine 1,1-dioxide (2 eq) was added portionwise. The resulting solution was stirred at room temperature for 16 h. After this time, the reaction was complete. The solvent was evaporated. The compound was extracted with EtOAc and water, washed with brine and dried over anhyd. MgSO4. Organic layers were filtered and evaporated. The final compound was isolated without further purification.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; MENET, Christel Jeanne Marie; SMITS, Koen Kurt; US2010/331319; (2010); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39093-93-1, name is Thiomorpholine 1,1-dioxide. A new synthetic method of this compound is introduced below. 39093-93-1

tert-Butyl thiomorpholine-4-carboxylate (1.91 g, 9.42 mmol) was dissolved in dichloromethane (50 ml); m-chloroperbenzoic acid (5.0 g, 19 mmol) was gradually added while cooled with ice bath, stirred, and under nitrogen atmosphere; and the reaction mixture was stirred at room temperature for 12 hours. After addition of a saturated aqueous solution of sodium thiosulfate, the reaction mixture was kept stirred for a while; and this was subjected to extraction with ethyl acetate, washed with brine, dried over anhydrous sodium sulfate, and concentrated under reduced pressure. Triethylamine (8.1 ml, 58 mmol) were added to the obtained crystals; and the reaction mixture was stirred at room temperature. tert-Butoxycarbonyl dicarbonate (13.3 ml, 58 mmol) was added thereto; and the reaction mixture was stirred at room temperature for 10 hours. The reaction mixture was concentrated under reduced pressure; and the obtained crystals were suspended with a solvent mixture of diethyl ether: ethanol = 10: 1, filtered off, washed with diethyl ether and dried under aeration to yield the title compound as colorless crystals (2.03 g, 8.63 mmol, 91.6percent). 1H-NMR Spectrum (DMSO-d6) delta (ppm): 1.40 (9H, s), 3.09 (4H, t, J=5.2 Hz), 3.72 (4H, t, J=5.2 Hz).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; Eisai Co., Ltd.; EP1522540; (2005); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Thiomorpholine 1,1-dioxide, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 39093-93-1

A solution of 1-(bromomethyl)-3-nitrobenzene (2.400 g, 11.110 mmol), thiomorpholine 1,1-dioxide (1.427 g, 10.554 mmol) and N,N-diisopropylethylamine (2.5 16 mL, 14.442 mmol) in acetonitrile (16 mL) was stirred at the room temperature for 24 hr. Then, water was added to the reaction mixture, followed by extraction with dichloromethane. The organic layer was washed with aqueous saturated sodium chloride solution, dried with anhydrous MgSO4, filtered, and concentrated in vacuo. The residue was chromatographed (Si02, 12 g cartridge; ethyl acetate / hexane = 0 percent to 50 percent) to give 4-(3-nitrobenzyl)thiomorpholine 1,1-dioxide as yellow solid (2.800 g, 93.2 percent).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 39093-93-1. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; CHONG KUN DANG PHARMACEUTICAL CORP.; LEE, Jaekwang; HAN, Younghue; KIM, Yuntae; CHOI, Daekyu; MIN, Jaeki; BAE, Miseon; YANG, Hyunmo; KIM, Dohoon; (644 pag.)WO2017/18803; (2017); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem