Tag: M.W:100-200

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

39093-93-1, General procedure: To a vial containing a solution of urea acid, 8a, (369.7 mg, 1 mmol), EDCI (230.8 mg, 1.2 mmol) and HOBt (147.6 mg, 1.1 mmol) in 1:1 DCM:N,N-dimethylformamide (DMF; 10 mL) was added 1,1-dioxothiomorpholine (133.1 mg, 1 mmol). The vial was capped, and the solution was stirred at room temperature for 27 h. The reaction mixture was diluted with EtOAc and washed with water (x3) and brine (x1). The organic layer was dried over anhydrous sodium sulfate, filtered and concentrated under vacuum. Purification by silica flash column using 97:3 DCM:MeOH gave 401.0 mg (82percent) of 13a as a white solid.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Article; Moffett, Kristofer; Konteatis, Zenon; Nguyen, Duyan; Shetty, Rupa; Ludington, Jennifer; Fujimoto, Ted; Lee, Kyoung-Jin; Chai, Xiaomei; Namboodiri, Haridasan; Karpusas, Michael; Dorsey, Bruce; Guarnieri, Frank; Bukhtiyarova, Marina; Springman, Eric; Michelotti, Enrique; Bioorganic and Medicinal Chemistry Letters; vol. 21; 23; (2011); p. 7155 – 7165;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.20196-21-8, Thiomorpholin-3-one it is a common compound, a new synthetic route is introduced below., 20196-21-8

Preparation 6 4-Benzylthiomorpholin-3-one Under a nitrogen atmosphere in a flame-dried flask, sodium hydride (4.65 g, 0.105 mol, 54% oil dispersion) was added to 150 mL of anhydrous dimethylformamide (DMF), and the suspension was cooled to 0 C. Thiomorpholin-3-one (11.7 g, 0.1 mol) was added in portions over 30 minutes with stirring. After gas evolution had stopped (ca. 30 minutes), benzyl chloride (12.1 g, 0.105 mol) in DMF (50 mL) was added and stirring was continued at room temperature overnight. The reaction was then warmed to 80 C. for 15 minutes and cooled. Water (250 mL) was added and the mixture was extracted with chloroform which was dried (MgSO4) and concentrated in vacuo to an oil. The oil was triturated with ethyl ether (Et2O) and cooled by dry ice to give the product, 12.75 g as a solid, m.p. 60-42 C. Recrystallization of 5 g from 100 mL of Et2O gave 3.5 g of pure product, m.p. 62-43 C. along with a second crop of 0.75 g with m.p. 62-43 C., 20196-21-8

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 20196-21-8. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Pfizer INC; US6423708; (2002); B1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 39093-93-1, name is Thiomorpholine 1,1-dioxide. This compound has unique chemical properties. The synthetic route is as follows. 39093-93-1

General procedure: To a vial containing a solution of urea acid, 8a, (369.7 mg, 1 mmol), EDCI (230.8 mg, 1.2 mmol) and HOBt (147.6 mg, 1.1 mmol) in 1:1 DCM:N,N-dimethylformamide (DMF; 10 mL) was added 1,1-dioxothiomorpholine (133.1 mg, 1 mmol). The vial was capped, and the solution was stirred at room temperature for 27 h. The reaction mixture was diluted with EtOAc and washed with water (x3) and brine (x1). The organic layer was dried over anhydrous sodium sulfate, filtered and concentrated under vacuum. Purification by silica flash column using 97:3 DCM:MeOH gave 401.0 mg (82percent) of 13a as a white solid. 1H NMR (400 MHz, acetone-d6): delta 10.03 (s, 1H), 9.23 (s, 1H), 8.11 (d, J = 8.4 Hz, 1H), 8.00 (d, J = 7.2 Hz, 1H), 7.86 (d, J = 8.0 Hz, 1H), 7.67 (d, J = 8.2 Hz, 1H), 7.49-7.41 (m, 2H), 7.40-7.34 (m, 1H), 6.70 (s, 1H), 4.14-4.05 (m, 4H), 3.20 (t, J = 4.8 Hz, 4H), 1.30 (s, 9H). MS m/z (APCI+) Found (M+H): 486.2

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Article; Moffett, Kristofer; Konteatis, Zenon; Nguyen, Duyan; Shetty, Rupa; Ludington, Jennifer; Fujimoto, Ted; Lee, Kyoung-Jin; Chai, Xiaomei; Namboodiri, Haridasan; Karpusas, Michael; Dorsey, Bruce; Guarnieri, Frank; Bukhtiyarova, Marina; Springman, Eric; Michelotti, Enrique; Bioorganic and Medicinal Chemistry Letters; vol. 21; 23; (2011); p. 7155 – 7165;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

General procedure: To a vial containing a solution of urea acid, 8a, (369.7 mg, 1 mmol), EDCI (230.8 mg, 1.2 mmol) and HOBt (147.6 mg, 1.1 mmol) in 1:1 DCM:N,N-dimethylformamide (DMF; 10 mL) was added 1,1-dioxothiomorpholine (133.1 mg, 1 mmol). The vial was capped, and the solution was stirred at room temperature for 27 h. The reaction mixture was diluted with EtOAc and washed with water (x3) and brine (x1). The organic layer was dried over anhydrous sodium sulfate, filtered and concentrated under vacuum. Purification by silica flash column using 97:3 DCM:MeOH gave 401.0 mg (82percent) of 13a as a white solid. 1H NMR (400 MHz, acetone-d6): delta 10.03 (s, 1H), 9.23 (s, 1H), 8.11 (d, J = 8.4 Hz, 1H), 8.00 (d, J = 7.2 Hz, 1H), 7.86 (d, J = 8.0 Hz, 1H), 7.67 (d, J = 8.2 Hz, 1H), 7.49-7.41 (m, 2H), 7.40-7.34 (m, 1H), 6.70 (s, 1H), 4.14-4.05 (m, 4H), 3.20 (t, J = 4.8 Hz, 4H), 1.30 (s, 9H). MS m/z (APCI+) Found (M+H): 486.2

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Article; Moffett, Kristofer; Konteatis, Zenon; Nguyen, Duyan; Shetty, Rupa; Ludington, Jennifer; Fujimoto, Ted; Lee, Kyoung-Jin; Chai, Xiaomei; Namboodiri, Haridasan; Karpusas, Michael; Dorsey, Bruce; Guarnieri, Frank; Bukhtiyarova, Marina; Springman, Eric; Michelotti, Enrique; Bioorganic and Medicinal Chemistry Letters; vol. 21; 23; (2011); p. 7155 – 7165;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

20196-21-8, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 20196-21-8

Step B Thiomorpholin-3-thione A mixture of 1.17 g (10 mmol) of thiomorpholin-3-one and 11 mmoles of Lawesson’s reagent in 25 mL of toluene was heated to reflux 2 hrs. The reaction mixture was cooled and the solvent was removed to give a residue. This was taken up in methylene chloride and applied on silica gel column and eluted with ethyl acetate containing methylene chloride (10%). The desired thiomorpholin-3-thione in 65% yield as a solid. 1 H NMR (CDCl3): 2.90(m,2H); 3.62(m,2H); 3.76(s,2H); 8.65(b,1H), 20196-21-8

According to the analysis of related databases, 20196-21-8, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Merck & Co., Inc.; US5629322; (1997); A;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 76176-87-9, name is Thiomorpholine-1-oxide hydrochloride. A new synthetic method of this compound is introduced below. 76176-87-9

To the stirred solution of 3-(4-amino-5-iodo-pyrrolo[2,3-d]pyrimidin-7-yl)-cyclobutanone (Step S.1 ; 680 mg, 2.05 mmol), 1.2-dichloroethane (55 ml) and diisopropylethylamine (1 .79 ml, 10.25 mmol) was subsequently added 1 -oxo-thiomorpholine hydrochloride (638 mg, 4.10 mmol) and sodium triacetoxyborohydride (652 mg, 3.08 mmol) at 0 C. The reaction mixture was stirred for 1 h at room temperature, and then poured into the stirred mixture of water (150 ml) and EtOAc (150 ml). The precipitate was filtered and washed with water and EtOAc. The solid collected was dried in vacuo to afford the title compound as beige crystals. HPLC-MS: M+H = 432.1 (R, = 0.43); TLC; R, = 0.36 (DCM/MeOH/NH3aq, 200:20:1 ).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 76176-87-9, we look forward to future research findings about .

Reference£º
Patent; NOVARTIS AG; IRM LLC; CHEN, Bai; FAIRHURST, Robin Alec; JIANG, Songchun; LU, Wenshuo; MARSILJE III, Thomas H.; MCCARTHY, Clive; MICHELLYS, Pierre-Yves; STUTZ, Stefan; WO2012/120469; (2012); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Thiomorpholine 1,1-dioxide, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 39093-93-1

General procedure: A mixture ofmethyl 3-iodobenzoate (1 mmol), corresponding amine (3 mmol), K2CO3(4 mmol), CuI (0.2 mmol) and L-proline (0.4 mmol) in 15 mL of DMSO was heatedat 60 ¡ãC for 8 h. The cooled mixture was pour into 150 ml water, and extractedwith ethyl acetate (3 ¡Á 15 mL), the organic fractions were combined, washedwith saturated brine (2 ¡Á 15 ml) prior to drying over anhydrous sodium sulfate.After filtration and concentrate using a rotary evaporator, the residue was purified by silica gel column chromatographyusing a mixture of petroleum ether/ethyl acetate (20 : 1, v/v) as eluent toafford the desired product.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 39093-93-1. We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Li, Zheng; Pan, Miaobo; Su, Xin; Dai, Yuxuan; Fu, Mian; Cai, Xingguang; Shi, Wei; Huang, Wenlong; Qian, Hai; Bioorganic and Medicinal Chemistry; vol. 24; 9; (2016); p. 1981 – 1987;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

A mixture isopropyl 4-((lr,4r)-4-(5-chloropyrazin-2-yloxy)cyclohexyloxy)piperidine-l- carboxylate (50 mg, 0.126 mmol), diacetoxypalladium (2.8 mg, 0.013 mmol), thiomorpholine- 1 ,1-dioxide (17 mg, 0.126 mmol), sodium 2-methylpropan-2-olate (29 mg, 0.302 mmol), and l ,l’-3/4w(di-t-butylphosphino)ferrocene (12 mg, 0.025 mmol) in 1 ,4-dioxane (0.8 mL) was heated at 100 ¡ãC for 1 h under microwave irradiation. LCMS showed product had formed and no starting material remained. Water was added to the reaction mixture and it was extracted with DCM (3 x 15 mL). The organic layer was rinsed with brine, dried with Na2S04 and concentrated to give a brown oil. The brown oil was purified using Biotage.(TM). flash chromatography and a 25 g SNAP.(TM). column, 20-100percent EtOAc-hexanes, 15 column volumes. Fractions containing product were combined and concentrated to give the title compound (25 mg, 0.050 mmol, 40.1 percent yield) as a light brown solid. ‘H NMR (CDCI3 , 400 MHz) delta 1.23 (d, J = 4 Hz, 6H), 1.46-1.55 (m, 6H), 1.77-1.82 (m, 2H), 1.96-2.01 (m, 2H), 2.09-2.14 (m, 2H), 3.06 (t, J = 4Hz , 4H), 3.09-3.16 (m, 2H), 3.48-3.52 (m, 1H), 3.54-3.59 (m, 1H), 3.78-3.84 (m, 2H), 4.06 (t, J = 4Hz , 4H), 4.85-4.94 (m, 2H), 7.73 (s, 1H), 7.82 (s, 1H), LCMS m/z: 497.6 [M+H]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Patent; ARENA PHARMACEUTICALS, INC.; JONES, Robert M.; HAN, Sangdon; BUZARD, Daniel J.; LEHMANN, Juerg; NARAYANAN, Sanju; YUE, Dawei; WO2011/127051; (2011); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, it is a common compound, a new synthetic route is introduced below.

7-Bromo-isochroman-4-one (0.45 g, 2 mmol) and 1,1-dioxothiomorpholine (0.3 g, 2 mmol) were dissolved in 1,2-dichloroethane (30 mL) and added Sodium triacetoxyborohydride (1 g, 20 mmol) was stirred at room temperature for 8 hours. The reaction solution was concentrated to dryness.Purified by silica gel column chromatography,A white solid (0.5 g, 85percent) was obtained., 39093-93-1

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; Shanghai Xiangjin Biological Technology Co., Ltd.; Sun Fang; Zhan Youni; (53 pag.)CN108341814; (2018); A;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 39093-93-1

Step-E: (1R,2R)?N-(1-Cyanocyclopropyl)-2-{4-[4-(1,1-dioxo-1lambda6-thiomorpholin-4-yl)phenyl]-2-(4-fluorophenyl)-1,3-oxazol-5-yl}cyclohexanecarboxamide (Compound 7) [0274] To a mixture of (1R,2R)-2-(4-(4-bromophenyl)-2-(4-fluorophenyl)oxazol-5-yl)-N-(1-cyanocyclopropyl)cyclohexanecarboxamide (116 mg, 0.228 mmol), thiomorpholine 1,1-dioxide (93 mg, 0.685 mmol), Chloro(2-dicyclohexylphosphino-2?,4?,6?-triisopropyl-1,1?-biphenyl)[2-(2-aminoethyl)phenyl)]palladium(II) (8.43 mg, 0.011 mmol) and K3PO4.H2O (63.1 mg, 0.274 mmol) in a vial under an inert atmosphere was added THF (1.5 mL). The vial was sealed and heated at 100¡ã C. for 2 h., cooled to rt and concentrated. The residue was taken in DMSO, filtered and the filtrate was subjected to reverse phase HPLC purification (Sunfire C18 30¡Á150 mm column; 10 to 95percent MeCN in water. 0.1percent TFA modifier for MeCN and water). Desired fractions were partitioned between saturated aqueous sodium bicarbonate and dichloromethane. Layers were separated. Aqueous layer was extrated with dichloromethane (3¡Á). Combined organic solutions were dried over Na2SO4 and concentrated to give desired product as a white solid (120 mg, 93percent). MS [M+H]+ 563.1. 1H NMR (400 MHz, CDCl3) delta 8.05-8.02 (m, 2H), 7.68-7.63 (m, 2H), 7.21-7.14 (m, 2H), 7.20-6.97 (m, 2H), 5.66 (s, 1H), 3.94-3.91 (m, 1H), 3.30-3.22 (m, 1H), 3.14-3.12 (m, 4H), 2.51-2.44 (m, 1H), 2.1-1.3 (m, 10H), 0.78-0.58 (m, 2H).

According to the analysis of related databases, 39093-93-1, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Stachel, Shawn; Paone, Daniel V.; Li, Jing; Nanda, Kausik; US2015/99719; (2015); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem