Heterocyclic Building Blocks-Thiomorpholine

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 39093-93-1, name is Thiomorpholine 1,1-dioxide. This compound has unique chemical properties. The synthetic route is as follows. 39093-93-1

A mixture of thiomorpholine 1,1-dioxide (270 mg, 2.0 mmol) in DMF (10 ml) was prepared at room temperature and sodium hydride (60 wtpercent in oil, 96 mg, 2.40 mmol) added in one portion and the mixture stirred at room temperature for 1h. 1-Bromo-4-(bromomethyl)benzene was then added in one portion and the mixture stirred overnight for 17.5 h under argon. The mixture was then quenched with saturated aqueous ammonium chloride solution (10 ml) and diluted with ethyl acetate (30 ml). The mixture was partitioned and the aqueous layer removed. The organic layers were then washed with 5percent aqueous lithium chloride solution (2x 10 ml), brine (10 ml), dried over magnesium sulphate and the solvent removed under reduced pressure. The crude product was then purified by column (0-5percent methanol/dichloromethane) to afford 4-(4- bromobenzyl)thiomorpholine 1,1-dioxide as a colourless solid (283 mg, 0.93 mmol,47percent). 1H NMR (500 MHz; CDCl3) delta 2.98 (brs, 4H), 3.06 (brs, 4H), 3.60 (5, 2H), 7.20 (d, 2H, J 8.1 Hz), 7.47 (d, 2H, J= 8.3 Hz) ppm.Purity by LCMS (UV Chromatogram, 190-450nm) 95percent, rt = 5.0 min m/z 306 (M+H)+

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; UNIVERSITY OF DUNDEE; GILBERT, Ian Hugh; NORCROSS, Neil; BARAGANA RUIBAL, Beatriz; PORZELLE, Achim; WO2013/153357; (2013); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, it is a common compound, a new synthetic route is introduced below.

c. Preparation of 1,1-dioxo-1lambda6-thiomorpholine-4-carboxylic acid 3-chloropropyl ester In a 500 mL flask, thiomorpholine dioxide (13.5 g, 100 mmol) was dissolved in dichloromethane (150 mL) at room temperature and N,N-diisopropylethylamine (19.2 mL, 110 mmol) was added. After stirring at room temperature for 10 min, the reaction mixture was cooled in an ice bath to approximately 5¡ã C. To the reaction mixture, was added 1-chloro-3-chloromethoxypropane (11.8 mL, 100 mmol) via addition funnel at a rate which maintained the reaction temperature below 10¡ã C. When the addition was complete, the reaction mixture was allowed to warm to room temperature. The reaction mixture was washed with water (2*100 mL), and the organic phase dried over anhydrous sodium sulfate (25 g). After filtration, the solvent was removed by distillation to yield the title compound as an oily solid that solidified upon standing (24.0 g, 94percent yield)., 39093-93-1

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; THERAVANCE, INC.; US2007/117796; (2007); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 134676-67-8, name is N-Boc-2-thiomorpholinecarboxylic Acid. This compound has unique chemical properties. The synthetic route is as follows. 134676-67-8

[00227] To a solution of 4-(tert-butoxycarbonyl)thiomorpholine-2-carboxylic acid (300 mg, 1.2 mmol) in THF (6 ml) was dded 4-chloroaniline (170 mg, 1.3 mmol), N-(3- dimethylaminopropyl)-N ?-ethylcarbodiimide hydrochloride (350 mg, 1.8 mmol), N,Ndiisopropylethylamine (0.64 ml, 3.6 mmol), and 4 N,N-diisopropylethylamine (29 mg, 0.24 mmol). The reaction stuffed overnight at room temperature. The reaction was poured into ethyl acetate, and washed with iN HC1, saturated sodium bicarbonate solution and brine. The organic layer was dried over magnesium sulfate, filtered, and concentrated. The crude residue was purified by column chromatography eluting with 10-30% ethyl acetate in hexanes to give the title compound as a colorless gum (296 mg, yield 68%).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 134676-67-8, we look forward to future research findings about .

Reference£º
Patent; THE REGENTS OF THE UNIVERSITY OF MICHIGAN; BOARD OF TRUSTEES OF MICHIGAN STATE UNIVERSITY; LARSEN, Scott, D.; NEUBIG, Richard; HAAK, Andrew; HUTCHINGS, Kim; RAJESWARAN, Walajapet; (156 pag.)WO2016/73847; (2016); A2;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

Example 1 Step 3: (1,1-Dioxo-thiomorpholin-4-yl)-[5-(1-isopropyl-piperidin-4-yloxy)-1-(2,2,2-trifluoro-ethyl)-1H-indol-2-yl]-methanone A mixture of 5-(1-isopropyl-piperidin-4-yloxy)-1-(2,2,2-trifluoro-ethyl)-1H-indole-2-carboxylic acid, hydrochloric salt with one equivalent of lithium chloride (650 mg, 1.0 eq.), 2-(1H-benzotriazole-1-yl)-1,1,3,3-tetramethylurunium tetrafluoroborate (563 mg, 1.2 eq.), thiomorpholine-1,1-dioxide (purchased at Syntec, ref. M1201) and diisopropylethylamine (1.22 mL, 5 eq.) in dimethylformamide was stirred at room temperature for 24 h and then partitioned between an aqueous solution of sodium hydrogenocarbonate and ethyl acetate. The aqueous layer was extracted with ethyl acetate and the combined organic layers were washed with water and brine, dried over sodium sulfate, filtered, evaporated in vacuo and purified on silica eluting with dichloromethane/methanol/ammoniac. One fraction was isolated and dried in vacuo, to yield 468 mg (66percent) of the desired product as off-white solid. MS (m/e): 502.5 (MH+, 100percent). ; Example20 Step 4: (1,1-Dioxo-1lambda6-thiomorpholin-4-yl)-(5-hydroxy-1-isopropyl-1H-indol-2-yl)-methanone In analogy to the procedure described for the synthesis of example 1, step 3, the title compound was synthesised from 5-Hydroxy-1-isopropyl-1H-indole-2-carboxylic acid (Example 20, step 3) and thiomorpholine-1,1-dioxide (purchased at Syntec, ref. M1201). The desired product was obtained in a yield of 75percent as white solid. MS (m/e): 335.5 (M-H, 100percent)., 39093-93-1

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 39093-93-1. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Nettekoven, Matthias; Plancher, Jean-Marc; Richter, Hans; Roche, Olivier; Rodriguez Sarmiento, Rosa Maria; Taylor, Sven; US2007/123526; (2007); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.76176-87-9, Thiomorpholine-1-oxide hydrochloride it is a common compound, a new synthetic route is introduced below., 76176-87-9

To a suspension of Intermediate 36 (100 mg, 0.24 mmol, 1 .0 eq) in CH2CI2 (10mL) was added thiomorpholine-1-oxide hydrochloride (112 mg, 0.72 mmol, 3.0eq) and sodium acetate (59 mg, 0.72 mmol, 3.0 eq). The reaction mixture washeated to reflux for 2 h, cooled to rt and sodium triacetoxyborohydride (102 mg,0.72 mmol, 2.0 eq) added in one portion. After 16 h at rt, the reaction mixture was partitioned between water (10 mL) and CH2CI2 (15 mL). The aqueous phase was re-extracted with CH2CI2 (2 x 15 mL) and the combined organics were dried over magnesium sulfate, filtered, and concentrated in vacuo. The residue (157mg) was purified by flash chromatography with EtOAc/MeOH (1:0-4:1) to affordExample AK as pale yellow solids (91 mg, 73 %) 1H NMR (DMSO-d5) oH. 11.32 (brs, 1H), 8.83 (d, J=1.9 Hz, 1H), 8.71 (d, J=1.9Hz, 1H), 8.28 (d, J=7.5 Hz, 1H), 7.43-7.66 (m, 3H), 7.26 (t, J=7.7 Hz, 1H), 3.97-4.13 (m, 4H), 3.79-3.93 (m, 6H), 2.94 (quin, J=10.3 Hz, 4H), 2.66-2.83 (m, 4H).MS (ESj 519.0 [M+H].

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 76176-87-9, and friends who are interested can also refer to it.

Reference£º
Patent; KARUS THERAPEUTICS LTD; SHUTTLEWORTH, Stephen Joseph; SILVA, Franck Alexandre; CECIL, Alexander Richard Liam; ALEXANDER, Rikki Peter; GATLAND, Alice Elizabeth; FINNEMORE, Daniel John; (123 pag.)WO2017/29521; (2017); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 39093-93-1, name is Thiomorpholine 1,1-dioxide. This compound has unique chemical properties. The synthetic route is as follows. 39093-93-1

B. Synthesis of 5?-O-DMT-3?-O-[methyl-(N,N-diisopropyl)]-phosphoramidite-2?-O-thiomorpholino-1, 1-dioxidethionocarbamateuridine. 3?-5?-tetraisopropyldisiloxane Uridine (ChemeGenes), 10 mmol, 4.8 grams was dissolved in 100mls of anhydrous acetonitril in a 500 ml roundbottom flask fitted with a serum stopper. To the reaction 1.9 grams of1, 1?-thiocarbonyldiimidazole (Aldrich) was added with 0.2 grams of 4-(dimethyl)aminopyridine. The reaction washeated using a heat gun and stirred until the reagents had dissolved and the solution was clear. The reaction wasallowed to stir overnight (12 hours). After 12 hours, the reaction mixture was a slurry of crystals. The crystals wereisolated by filtration through a medium sintered glass funnel. The product was washed with cold acetonitrile anddried under vacuum. TLC analysis confirmed that the product was a single species giving 5.97 grams of product(100percent) ESI-Q-TOF mass spectroscopy analysis confirmed the product as the 5?,3?-O-(tetraisopropyldisiloxane-1,3-diyl)-2?-thionoimidazole with a mass of M+1, 598.12 m/e. The product was redissolved in 100 ml of anhydrousacetonitrile by heating using a heat gun. To the reaction was added 11 mmol of thiomorpholine-1, 1-dioxide (TCIAmerica) and 1.1 mmol of 4-(dimethyl)aminopyridine. The reaction was stoppered and stirred for 12 hours. After 12hours, the reaction mixture was a slurry of crystals. The crystals were isolated by filtration through a medium sinteredglass funnel. The product was washed with cold acetonitrile and dried under vacuum. TLC analysis confirmed thatthe product was a single species giving 6.61 grams of product (99percent). ESI-Q-TOF mass spectroscopy analysisconfirmed the product as the 5?,3?-O-(tetraisopropyldisiloxane-1, 3-diyl)-2?-O-thiomorpholino-1, 1-dioxidethionocarbamatewith a mass of M+1, 664.21 m/e. Hydrogen fluoride-pyridine complex (HF:Py 7:3, 7 mL) was carefully toice-cold solution of pyridine (8 mL) in acetonitrile (46.5 mL). The pyridine-HF reagent so formed (32 mL) was thentransferred to the flask with 5?, 3?-O-(tetraisopropyldisiloxane-1,3-diyl)- 2?-O-thiomorpholino-1, 1-dioxidethionocarbamateprotected uridine (10 mmole), and the mixture was stirred at room temperature for 2 hours. The reactionwas quenched with 5percent solution of calcium chloride in water (300 mL). Crude product was extracted with EtOAc(3-5 times), and dried with anhydrous Na2SO4. After filtration organic layer was concentrated to a viscous oil giving3.4 grams (80percent yield) of product shown as a single spot by TLC with a confirmed identity of the 2?-O-thiomorpholino-1, 1-dioxidethionocarbamate protected uridine by ESI-Q-TOF mass spectroscopy with a mass of M+ 1, 422.10 m/e.2?-O-thiomorpholino-1, 1-dioxidethionocarbamate protected uridine (8.0 mmole) was redissolved in anhydrous THF(80 mL), 2,4,6-collidine (60 mmole) and dimethoxytrityl chloride (10.0 mmole) were added, and the mixture wasstirred at room temperature until TLC (CHCl3/MeOH 9:1) showed full disappearance of nucleoside substrate (16-24hours). 2,4,6-Collidine (8.0 mmole) and 1-methylimidazole (4.0 mmole) were added in one portion and N,N-diisopropylmethylphosphonamidicchloride (20 mmol) was added slowly to the reaction mixture over 10-15 minutes. Thereaction mixture was then stirred for another 2 hours. The solvent was removed in vacuo, and the crude productwas purified by column chromatography using hexanes with a gradient of EtOAc (0-50percent).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; Agilent Technologies, Inc.; Dellinger, Douglas J.; Sierzchala, Agnieska; Turner, John; Myerson, Joel; Kupihar, Zoltan; Ferreira, Fernando; Caruthers, Marvin H.; EP2476689; (2015); B1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39093-93-1, name is Thiomorpholine 1,1-dioxide. A new synthetic method of this compound is introduced below. 39093-93-1

Step 2 Preparation of (1R,3aS,5aR,5bR,7aR,11aR,11bR,13aR,13bR)-3a-((2-(1,1-dioxidothiomorpholino)ethyl)amino)-5a,5b,8,8,11a-pentamethyl-1-(prop-1-en-2-yl)octadecahydro-1H-cyclopenta[a]chrysen-9(5bH)-one To a solution of (1R,3aS,5aR,5bR,7aR,11aR,11bR,13aR,13bR)-3a-(aziridin-1-yl)-5a,5b,8,8,11a-pentamethyl-1-(prop-1-en-2-yl)octadecahydro-1H-cyclopenta[a]chrysen-9(5bH)-one (4.0 g, 8.85 mmol) and thiomorpholine 1,1-dioxide (4.79 g, 35.4 mmol) in toluene (30 mL) was added boron trifluoride diethyl etherate (1 mL in 100 mL of toluene, 10 mL) forming a yellow suspension. The mixture was sonicated for 2 min, then stirred at RT for 5 days. The reaction mixture was diluted with EtOAc (200 mL), washed with NaHCO3 (200 mL), dried over Na2SO4, filtered and concentrated in vacuo. The crude product was purified by a silica gel column (160 gm) eluted with 20-50percent of EtOAc/Hexane to give desired ketone (2.95 g, 57percent) as a solid. MS: m/e 587.5 (M+H)+, 2.39 min (method 4). 1H NMR (400 MHz, CHLOROFORM-d) delta 4.74-4.70 (m, 1H), 4.62-4.59 (m, 1H), 3.11-2.99 (m, 7H), 2.72-2.36 (m, H), 1.98-0.82 (m. 23H), 1.69 (s, 3H), 1.08 (s, 6H), 1.04 (s, 3H), 0.98 (s, 3H), 0.95 (s, 3H).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; Swidorski, Jacob; Meanwell, Nicholas A.; Regueiro-Ren, Alicia; Sit, Sing-Yuen; Chen, Jie; Chen, Yan; US2013/210787; (2013); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 39093-93-1

Example 224-(1,1-Dioxo-thiomorpholine-4-carbonyl)-2-methyl-2H-pyrazole-3-carboxylic acid (2-phenyl-[1,2,4]triazolo[1,5-a]pyridin-7-yl)-amideA mixture of 1-methyl-5-(2-phenyl-[1,2,4]triazolo[1,5-a]pyridin-7-ylcarbamoyl)-1H-pyrazole-4-carboxylic acid (100 mg, 276 mumol), thiomorpholine-1,1-dioxide (44.8 mg, 331 mumol), diisopropylethylamine (145 mul, 828 mumol) and propylphosphonic anhydride (50percent in ethyl acetate, 407 mul, 690 mumol) in tetrahydrofurane (7.00 ml) is stirred for 4 hours at 70¡ã C. and then for 60 hours at 25¡ã C. under nitrogen atmosphere.The solvent is evaporated and to the residue is added sat. aqueous sodium hydrogencarbonate solution.The mixture is stirred for 20 minutes while a white solid precipitates.The solid is collected by filtration, washed with diethylether and dried affording 4-(1,1-dioxo-thiomorpholine-4-carbonyl)-2-methyl-2H-pyrazole-3-carboxylic acid (2-phenyl-[1,2,4]triazolo[1,5-a]pyridin-7-yl)-amide (112 mg, 84.7percent) as a white solid. mp.: >250¡ã C. MS: m/z=480.2 (M+H+).

According to the analysis of related databases, 39093-93-1, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Flohr, Alexander; Gobbi, Luca; Groebke Zbinden, Katrin; Koerner, Matthias; Peters, Jens-Uwe; US2012/142665; (2012); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Thiomorpholin-3-one, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 20196-21-8

Preparation 4 4-(3,4-Dichlorophenyl)-thiomorpholin-3-one Under a nitrogen atmosphere in a flame-dried flask, sodium hydride (72 mg, 1.79 mmol, 60% oil dispersion) was washed with hexanes and then treated with 6 mL of anhydrous DMF, and cooled to 0 C. Thiomorpholin-3-one (200 mg, 1.71 mmol) was added in one portion with stirring. After gas evolution had stopped (ca. 30 min), 4-iodo-1,2-dichlorobenzene (700 mg, 2.56 mmol) was added, followed after 5 minutes by copper (I) bromide (490 mg, 3.42 mmol). After heating at 75 C. overnight, the mixture was partitioned between ethyl acetate and 1N lithium chloride, filtered through diatomaceous earth and combined with additional ethyl acetate washes of the diatomaceous earth filter cake. The organic layers were washed with additional 1N lithium chloride, brine (saturated sodium chloride) and dried over calcium sulfate (CaSO4). Concentration in vacuo gave 363 mg of light brown oil which was flash chromatographed (30-50% ethyl acetate in hexanes) to give a white solid, 108 mg. 1H-NMR (CDCl3, 400 MHz) d 7.44 (1H, d), 7.37 (1H, s), 7.12 (1H, dd), 3.93 (2H, t), 3.43 (2H, s), 3.01 (2H, t).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 20196-21-8. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Gibbs, Megan Ann; Howard, Harry Ralph; Sprouse, Jeffrey Scott; Schachter, Joel Barry; Chappell, Phillip Branch; US2002/49214; (2002); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

76176-87-9, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 76176-87-9

To the stirred solution of [cis-3-(4-amino-5-iodo-pyrrolo [2,3-d]pyrimidin-7-yl)-cyclobutyl] methanol (Intermediate M: 348 mg, 1.0 mmol) and acetonitrile (70 mL) was added IBX (Atlantic SciTech 86900: 561 mg, 2.0 mmol, 2 eq). The reaction mixture was stirred for 1 h at 80 C. Th e reaction mixture was filtered at 40 C and the filtrate was concentrated. To the residue was added subsequently DCM (50 ml_), ethyl-diisopropyl-amine (3.43 ml_, 20 mmol, 20 eq), 1-oxide thiomorpholin hydrochloride (312 mg, 2.0 mmol, 2 eq) and sodium triacetoxyborohy- dride (637 mg, 3.0 mmol, 3 eq) with stirring at rt. The reaction mixture was stirred for 1 h at rt and then partitioned between NaHC03 1M and EtOAc. The combined organic layers were washed with water and brine, dried (Na2S04), filtered and concentrated. The residue was purified by silica gel column chromatography (DCM/MeOH/NH3aq, 200:20:1) to afford 238 mg of the title compound as pale yellow crystals: HPLC-MS: M+H = 446.2 (Rt = 0.41) (Method X); TLC; Rf = 0.26 (DCM/MeOH/NH3aq, 200:20: 1).

According to the analysis of related databases, 76176-87-9, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; NOVARTIS AG; IRM LLC; CHEN, Bei; FAIRHURST, Robin, Alec; FLOERSHEIMER, Andreas; FURET, Pascal; GUAGNANO, Vito; JIANG, Songchun; LU, Wenshuo; MARSILJE, Thomas, H.; MCCARTHY, Clive; MICHELLYS, Pierre-Yves; STAUFFER, Frederic; STUTZ, Stefan; VAUPEL, Andrea; WO2011/29915; (2011); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem