Heterocyclic Building Blocks-Thiomorpholine

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

39093-93-1, Dissolved a mixture of 1 ,4-dibromobenzene (10.014 g, 42.4 mmol) and thiomorpholine 1 ,1 – dioxide (5.16 g, 38.2 mmol) in dioxane (150 mL), then added Pd(OAc)2 (959 mg, 4.24 mmol), BINAP (racemic) (2.64 g, 4.24 mmol), and CS2CO3 (41.48 g, 127 mmol). The reaction mixture was degassed several times then connected to a reflux condensor under nitrogen and heated to 100 ¡ãC for overnight. The reaction was cooled to RT then filtered through celite, and washed with EtOAc. The resulting solution was concentrated under reduced pressure and the residue was purified by flash chromatography on silica gel (0-50percent EtOAc in hexanes) to yield the desired 4-(4-Bromophenyl)thiomorpholine 1 ,1 -dioxide as a light yellow solid. MS (ES, m/z): 292.1 (M + 1).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; STACHEL, Shawn; PAONE, Daniel, V.; LI, Jing; GINNETTI, Anthony; FU, Jianmin; XU, Shimin; WO2015/123089; (2015); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 39093-93-1

Step 2 Preparation of (1R,3aS,5aR,5bR,7aR,11aR,11bR,13aR,13bR)-3a-((2-(1,1-dioxidothiomorpholino)ethyl)amino)-5a,5b,8,8,11a-pentamethyl-1-(prop-1-en-2-yl)octadecahydro-1H-cyclopenta[a]chrysen-9(5bH)-one To a solution of (1R,3aS,5aR,5bR,7aR,11aR,11bR,13aR,13bR)-3a-(aziridin-1-yl)-5a,5b,8,8,11a-pentamethyl-1-(prop-1-en-2-yl)octadecahydro-1H-cyclopenta[a]chrysen-9(5bH)-one (4.0 g, 8.85 mmol) and thiomorpholine 1,1-dioxide (4.79 g, 35.4 mmol) in toluene (30 mL) was added boron trifluoride diethyl etherate (1 mL in 100 mL of toluene, 10 mL) forming a yellow suspension. The mixture was sonicated for 2 min, then stirred at RT for 5 days. The reaction mixture was diluted with EtOAc (200 mL), washed with NaHCO3 (200 mL), dried over Na2SO4, filtered and concentrated in vacuo. The crude product was purified by a silica gel column (160 gm) eluted with 20-50percent of EtOAc/Hexane to give desired ketone (2.95 g, 57percent) as a solid. MS: m/e 587.5 (M+H)+, 2.39 min (method 4). 1H NMR (400 MHz, CHLOROFORM-d) delta 4.74-4.70 (m, 1H), 4.62-4.59 (m, 1H), 3.11-2.99 (m, 7H), 2.72-2.36 (m, H), 1.98-0.82 (m. 23H), 1.69 (s, 3H), 1.08 (s, 6H), 1.04 (s, 3H), 0.98 (s, 3H), 0.95 (s, 3H).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; Swidorski, Jacob; Meanwell, Nicholas A.; Regueiro-Ren, Alicia; Sit, Sing-Yuen; Chen, Jie; Chen, Yan; US2013/210787; (2013); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 114525-81-4, name is (R)-4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows. 114525-81-4

To a 25 mL round bottom flask, Intermediate 7 (540 mg, 1.45 mmol), Intermediate 9 (359 mg, 1.45 mmol), EDCI (418 mg, 2.18 mmol), HOBt (294 mg, 2.18 mmol), DIEA (374 mg, 2.9 mmol) and tetrahydrofuran (9 mL) were added, and stirred at room temperature overnight. Thereafter, the reaction product was subjected to vacuum distillation for removal of solvent, dissolved with water, and extracted 3 times with ethyl acetate. The extracts were combined, washed 3 times with saturated brine, concentrated, and separated through a silica gel column (eluent: petroleum ether/ethyl acetate), to give 688 mg of a white foamy solid product, yield 78.8%.1H-NMR (400 MHz, CDCl3) delta ppm: 7.42 (1H, d, J=1.12 Hz), 7.27 (2H, m), 5.75 (1H, s), 5.19 (1H, s), 4.58 (2H, s), 3.95-3.44 (10H, brm), 3.12 (1H, m), 2.82 (2H, m), 2.43 (2H, m), 1.92 (9H, s); EI-MS (m/z): 601.1 [M+H]+., 114525-81-4

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Reference£º
Patent; Li, Song; Wang, Ying; Xiao, Junhai; Ma, Dalong; Gong, Hongwei; Qi, Hui; Wang, Lili; Ling, Xiaomei; Zheng, Zhibing; Zhang, Yang; Zhong, Wu; Li, Meina; Xie, Yunde; Xu, Enquan; Li, Xingzhou; Ma, Jing; Zhao, Guoming; Zhou, Xinbo; Wang, Xiaokui; Liu, Hongying; US2015/126500; (2015); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.76176-87-9, Thiomorpholine-1-oxide hydrochloride it is a common compound, a new synthetic route is introduced below., 76176-87-9

To a solution of acid 1 (50 mg, 0.1 1 mmol) in DMF (1 mL) was added N- methylmorpholine (49 pL, 0.45 mmol) followed by PyBOP (87 mg, 0.17 mmol). The reaction mixture was stirred for 30 min at rt before addition of thiomorpholine-1 -oxide hydrochloride (35 mg, 0.22 mmol). After 3 h 30 min the reaction mixture was diluted with EtOAc (30 mL), washed with HCI solution (5%, 3 x 10 mL) and brine (10 mL), before being dried over MgS04, filtered and concentrated in vacuo. Purification by flash column chromatography with EtOAc/MeOH (1 :0 to 4:1 ) and subsequent trituration with Et20 afforded FU as pale beige solids (16 mg, 27%). (1390) LCMS (ES): Found 550.9 [M+Hf. (1391) 1H NMR (300 MHz, DMSO-cf6) d: 8.97 (d, J=1.5 Hz, 1 H), 8.86 (d, J=1.3 Hz, 1 H), (1392) 8.42 (dd, J=2.5, 1.4 Hz, 1 H), 8.33 (d, J=2.4 Hz, 1 H), 7.84 (d, J=1.5 Hz, 1 H), 7.75 (d, J=3.6 Hz, 1 H), 7.31 (d, J=3.8 Hz, 1 H), 5.76 (br s, 2H), 4.26-4.38 (m, 1 H), 3.79-3.93 (m, 1 H), 3.61 -3.76 (m, 1 H), 3.47-3.60 (m, 1 H), 2.82-3.05 (m, 3H), 2.71 -2.82 (m, 1 H). 19F NMR (282 MHz, DMSO-cf6) d: -64.80 (s, 3F).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 76176-87-9. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; KARUS THERAPEUTICS LIMITED; SHUTTLEWORTH, Stephen Joseph; GATLAND, Alice Elizabeth; FINNEMORE, Daniel John; ALEXANDER, Rikki Peter; SILVA, Franck; CECIL, Alexander; (233 pag.)WO2019/166824; (2019); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, it is a common compound, a new synthetic route is introduced below.

4-bromodeacetyl colchicine (59 mg, 0.14 mmol) was dissolved in dichloromethane (1.2 mL). Thiophosgene (0.011 mL, 0.14×1.05 mmol) and triethylamine (0.047 mL, 0.14×2.4 mmol) were added, and stirred at room temperature for 2 hours. Thiomorpholine-1,1-dioxide (38 mg, 0.14×2 mmol) was added, and stirred at room temperature overnight. The solvent was distilled off after the reaction. The residue was purified by Silica gel column chromatography (Biotage Isolera One, SANP 10 g, chloroform/methanol) to obtain title compound (a yellow solid, 78 mg, 90.8percent) .

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; CHIBA UNIVERSITY; YAKULTHONSHA COMPANY LIMITED; TAKAYAMA, HIROMITSU; YASOBU, NAOKO; KITAJIMA, MARIKO; YAEGASHI, TAKASHI; MATSUZAKI, TAKESHI; NAGAOKA, MASATO; HASHIMOTO, SHUSUKE; NISHIYAMA, HIROYUKI; SUGIMOTO, TAKUYA; ONO, MASAHIRO; (176 pag.)JP5829520; (2015); B2;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 76176-87-9, name is Thiomorpholine-1-oxide hydrochloride. A new synthetic method of this compound is introduced below. 76176-87-9

To a solution of thiomorpholine 1-oxide hydrochloride (340 mg) and triethylamine (0.31 mL) in N,N-dimethylformamide (25 mL) were added [2-(7-ethyl-5-{[6-(methylsulfonyl)pyridin-3-yl]oxy}-1H-indol-2-yl)-4,5-dihydro-1,3-thiazol-5-yl]acetic acid (500 mg), 1-hydroxybenzotriazole (300 mg) and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (420 mg) under ice-cooling, and the mixture was stirred under ice-cooling and then at room temperature for 15 hr. Water was added to the reaction solution, and the mixture was extracted with ethyl acetate. The organic layer was washed with aqueous sodium hydrogen carbonate solution and saturated brine, dried over magnesium sulfate, filtered and concentrated under reduced pressure. The obtained residue was subjected to silica gel column chromatography (ethyl acetate:methanol = 100:0 to 80:20, volume ratio), and the obtained pale-yellow crystals were recrystallized from tetrahydrofuran-ethyl acetate to give the title compound (354 mg, yield 58%) as colorless crystals. melting point 194-196C. MS 561 (MH+).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 76176-87-9, we look forward to future research findings about .

Reference£º
Patent; Takeda Pharmaceutical Company Limited; EP2371826; (2011); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 134676-67-8, name is N-Boc-2-thiomorpholinecarboxylic Acid. This compound has unique chemical properties. The synthetic route is as follows. 134676-67-8

4-(tert-butoxycarbonyl)thiomorpholine-2-carboxylic acid (2.47 g, 10 mmol) and HOBt (1.62 g, 12 mmol) were dissolved in DMF (20 mL), and EDCl (2.11 g, 11 mmol) was added. The reaction mixture was stirred for 1 hour, and 25% aqueous ammonia (5 mL) was added, and the reaction was stirred for another 2 hours. The reaction was then diluted with EtOAc (200 mL) and partitioned with water (100 mL). The organic layer was washed with saturated aq. NaHCO3 (2*100 mL), and then dried with Na2SO4. The solvent was removed in vacuo to afford title compound as white solid 2.46 g. MS (m/z): 147 (M+H-Boc)+

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 134676-67-8, we look forward to future research findings about .

Reference£º
Patent; HUTCHISON MEDIPHARMA LIMITED; Su, Wei-Guo; Deng, Wei; Ji, Jianguo; US2014/121200; (2014); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 128453-98-5, name is 4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows. 128453-98-5

o a solution of N-Boc thiomorpholine carboxylic acid (0.803 g, 2.96 mmol) in 16 mL of anhydrous dichloromethane was added O-benzotriazol-1-yl-Lambda/,Lambda/,Lambda/’,Lambda/’-tetramethyluronium tetrafluoroborate (TBTU) (1.03 g, 3.22 mmol) and the solution was stirred for 45 min. A solution of D-serine methyl ester hydrochloride (0.911 g, 5.85 mmol) and Huenig’s base (1.02 mL, 5.85 mmol) in dichloromethane was prepared and added to the reaction mixture. The reaction was left stirring at room temperature overnight. UPLC-MS analysis showed conversion to the product. The reaction was diluted with dichloromethane and extracted with water, dried (Na2SO4), and the solvent was removed. The crude (1.73 g) was taken to the next step without further purification; To a solution of N-Boc thiomorpholine carboxylic acid (0.488 g, 1.97 mmol) and O- benzotriazol-1-yl-Lambda/,Lambda/,Lambda/’,Lambda/’-tetramethyluronium tetrafluoroborate (TBTU) (0.697 g, 2.17 mmol) in 5 mL of anhydrous dichloromethane was added DIPEA (0.7 mL, 3.95 mmol) and the solution was stirred for 30 mins. To a suspension of D-serine methyl ester hydrochloride (0.47 g, 3.95 mmol) in 5 mL of anhydrous dichloromethane was added DIPEA (0.7 mL, 3.95 mmol) and the resulting solution was stirred for 30 mins. Then the solution containing the serine free base was added to the reaction mixture and it was left stirring at room temperature overnight.Water was added to the reaction mixture and the two phases were separated. The aqueous layer was extracted with dichloromethane (3X) and the combined organic phases were dried (Na2SO4) and evaporated to dryness. This crude material (1.66 g) was used in the next step without further purification. UPLC-MS: m/z= 349 (M+1 ) (at) t=0.59 min

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 128453-98-5, we look forward to future research findings about .

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/28654; (2007); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 39093-93-1, name is Thiomorpholine 1,1-dioxide. This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 39093-93-1

Example 24 {6-[3-(3-?1iota1thetaGammatheta-rho1?6etagamma1)-5^6?1iotagamma1-?8thetaChi3zetaomicron1-4-gamma^6?1iotaomicronchigamma]-rhogammapi??eta-3-gamma1}-(1,1-??omicronchiomicron-1lambda6- thiomorpholin-4-yl)-methanone To a solution of 6-[3-(3-chloro-phenyl)-5-methyl-isoxazol-4-ylmethoxy]-nicotinic acid (69 mg, 0.2 mmol) in DMF (300 L) were added 2-(lH-benzotriazole-l-yl)-l, 1,3,3- tetramethyluronium tetrafluoroborate (71 mg, 0.22 mmol), Nu,Nu-diisopropyl ethyl amine (171 muL, 1.0 mmol) and thiomorpholine-S,S-dioxide (0.22 mmol). The resulting reaction mixture was stirred for 1 h at room temperature. Concentration and purification by chromatography (Si02, heptane:ethyl acetate = 100:0 to 1: 1) afforded the title compound (80 mg, 87percent) which was obtained as a white solid. MS: m/e = 462.1 [M+H]+.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; DOTT, Pascal; HANLON, Steven Paul; HILDBRAND, Stefan; IDING, Hans; THOMAS, Andrew; WALDMEIER, Pius; WO2013/57123; (2013); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39093-93-1, name is Thiomorpholine 1,1-dioxide. A new synthetic method of this compound is introduced below. 39093-93-1

6-bromodihydrobenzofuran-3-one (1 g, 4 mmol)And 1,1-dioxothiomorpholine (0.7 g, 4 mmol) soluble in 1,2-dichloroethane (30mL), Sodium triacetylborohydride (1 g, 20 mmol) was added.Stir at room temperature for 8 hours.The reaction solution was concentrated to dryness.Purified by silica gel column chromatography,A white solid (0.9 g, 91%) was obtained.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; Shanghai Xiangjin Biological Technology Co., Ltd.; Sun Fang; Zhan Youni; (53 pag.)CN108341814; (2018); A;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem