Category: Thiomorpholine

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 76176-87-9, name is Thiomorpholine-1-oxide hydrochloride. A new synthetic method of this compound is introduced below. 76176-87-9

To a solution of thiomorpholine 1-oxide hydrochloride (340 mg) and triethylamine (0.31 mL) in N,N-dimethylformamide (25 mL) were added [2-(7-ethyl-5-{[6-(methylsulfonyl)pyridin-3-yl]oxy}-1H-indol-2-yl)-4,5-dihydro-1,3-thiazol-5-yl]acetic acid (500 mg), 1-hydroxybenzotriazole (300 mg) and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (420 mg) under ice-cooling, and the mixture was stirred under ice-cooling and then at room temperature for 15 hr. Water was added to the reaction solution, and the mixture was extracted with ethyl acetate. The organic layer was washed with aqueous sodium hydrogen carbonate solution and saturated brine, dried over magnesium sulfate, filtered and concentrated under reduced pressure. The obtained residue was subjected to silica gel column chromatography (ethyl acetate:methanol = 100:0 to 80:20, volume ratio), and the obtained pale-yellow crystals were recrystallized from tetrahydrofuran-ethyl acetate to give the title compound (354 mg, yield 58%) as colorless crystals. melting point 194-196C. MS 561 (MH+).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 76176-87-9, we look forward to future research findings about .

Reference£º
Patent; Takeda Pharmaceutical Company Limited; EP2371826; (2011); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, it is a common compound, a new synthetic route is introduced below.

4-bromodeacetyl colchicine (59 mg, 0.14 mmol) was dissolved in dichloromethane (1.2 mL). Thiophosgene (0.011 mL, 0.14×1.05 mmol) and triethylamine (0.047 mL, 0.14×2.4 mmol) were added, and stirred at room temperature for 2 hours. Thiomorpholine-1,1-dioxide (38 mg, 0.14×2 mmol) was added, and stirred at room temperature overnight. The solvent was distilled off after the reaction. The residue was purified by Silica gel column chromatography (Biotage Isolera One, SANP 10 g, chloroform/methanol) to obtain title compound (a yellow solid, 78 mg, 90.8percent) .

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; CHIBA UNIVERSITY; YAKULTHONSHA COMPANY LIMITED; TAKAYAMA, HIROMITSU; YASOBU, NAOKO; KITAJIMA, MARIKO; YAEGASHI, TAKASHI; MATSUZAKI, TAKESHI; NAGAOKA, MASATO; HASHIMOTO, SHUSUKE; NISHIYAMA, HIROYUKI; SUGIMOTO, TAKUYA; ONO, MASAHIRO; (176 pag.)JP5829520; (2015); B2;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.76176-87-9, Thiomorpholine-1-oxide hydrochloride it is a common compound, a new synthetic route is introduced below., 76176-87-9

To a solution of acid 1 (50 mg, 0.1 1 mmol) in DMF (1 mL) was added N- methylmorpholine (49 pL, 0.45 mmol) followed by PyBOP (87 mg, 0.17 mmol). The reaction mixture was stirred for 30 min at rt before addition of thiomorpholine-1 -oxide hydrochloride (35 mg, 0.22 mmol). After 3 h 30 min the reaction mixture was diluted with EtOAc (30 mL), washed with HCI solution (5%, 3 x 10 mL) and brine (10 mL), before being dried over MgS04, filtered and concentrated in vacuo. Purification by flash column chromatography with EtOAc/MeOH (1 :0 to 4:1 ) and subsequent trituration with Et20 afforded FU as pale beige solids (16 mg, 27%). (1390) LCMS (ES): Found 550.9 [M+Hf. (1391) 1H NMR (300 MHz, DMSO-cf6) d: 8.97 (d, J=1.5 Hz, 1 H), 8.86 (d, J=1.3 Hz, 1 H), (1392) 8.42 (dd, J=2.5, 1.4 Hz, 1 H), 8.33 (d, J=2.4 Hz, 1 H), 7.84 (d, J=1.5 Hz, 1 H), 7.75 (d, J=3.6 Hz, 1 H), 7.31 (d, J=3.8 Hz, 1 H), 5.76 (br s, 2H), 4.26-4.38 (m, 1 H), 3.79-3.93 (m, 1 H), 3.61 -3.76 (m, 1 H), 3.47-3.60 (m, 1 H), 2.82-3.05 (m, 3H), 2.71 -2.82 (m, 1 H). 19F NMR (282 MHz, DMSO-cf6) d: -64.80 (s, 3F).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 76176-87-9. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; KARUS THERAPEUTICS LIMITED; SHUTTLEWORTH, Stephen Joseph; GATLAND, Alice Elizabeth; FINNEMORE, Daniel John; ALEXANDER, Rikki Peter; SILVA, Franck; CECIL, Alexander; (233 pag.)WO2019/166824; (2019); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

To a solution of tert-butyl 4-((lR,3aR,5aR,5bR,7aR,l laS,l lbR,13aR,13bR)- 5a,5b,8,8,l la-pentamethyl-3a-(2-oxoethyl)-l-(prop-l-en-2-yl)- 2,3,3a,4,5,5a,5b,6,7,7a,8,l l,l la,l lb,12,13,13a,13b-octadecahydro-lH- cyclopenta[a]chrysen-9-yl)benzoate (50 mg, 0.082 mmol) in DCE (2 mL) was added acetic acid (0.014 mL, 0.245 mmol) and thiomorpholine 1,1-dioxide (25.4 mg, 0.188 mmol). The mixture became cloudy at first but turned into clear solution 10 min later. The mixture was stirred at RT for 2 hours. Sodium triacetoxyborohydride (86 mg, 0.408 mmol) was added, and the stirring was continued for 72 hours. The resulting mixture was diluted with saturated NaHCC (7 mL) and extracted with dichloromethane (3 x 7 mL). The combined organic layers were dried over anhydrous a2S04. The drying agent was removed by filtration and the filtrate was concentrated under reduced pressure. The crude product was purified on silica gel column, eluted with mixtures of hexane/acetone first, followed by MeOH/CLkCh to afford the title compound as a white solid (50 mg, 83percent). MS: m/e 732.73 (M+H)+, 3.01 min (method 6). NMR (400MHz, CHLOROFORM-d) delta 7.93 – 7.83 (m, 2H), 7.23 – 7.09 (m, 2H), 5.30 – 5.25 (m, 1H), 4.71 (d, J=2.0 Hz, 1H), 4.62 – 4.58 (m, 1H), 3.36 – 3.29 (m, 4H), 3.13 – 3.06 (m, 4H), 3.06 – 3.00 (m, 2H), 2.54 – 2.37 (m, 2H), 2.11 (dd, J=17.2, 6.4 Hz, 1H), 2.00 – 1.78 (m, 3H), 1.74 (m, 4H), 1.70 (s, 3H), 1.67 – 1.62 (m, 2H), 1.60 (s, 9H), 1.56 – 1.17 (m, 11H), 1.11 – 1.08 (m, 3H), 1.07 – 1.03 (m, 2H), 1.01 (s, 3H), 0.99 (s, 3H), 0.93 (s, 6H).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; SIT, Sing-Yuen; CHEN, Jie; CHEN, Yan; SWIDORSKI, Jacob; REGUEIRO-REN, Alicia; MEANWELL, Nicholas A.; (109 pag.)WO2016/77572; (2016); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 134676-67-8, name is N-Boc-2-thiomorpholinecarboxylic Acid. This compound has unique chemical properties. The synthetic route is as follows. 134676-67-8

4-(tert-butoxycarbonyl)thiomorpholine-2-carboxylic acid (2.47 g, 10 mmol) and HOBt (1.62 g, 12 mmol) were dissolved in DMF (20 mL), and EDCl (2.11 g, 11 mmol) was added. The reaction mixture was stirred for 1 hour, and 25% aqueous ammonia (5 mL) was added, and the reaction was stirred for another 2 hours. The reaction was then diluted with EtOAc (200 mL) and partitioned with water (100 mL). The organic layer was washed with saturated aq. NaHCO3 (2*100 mL), and then dried with Na2SO4. The solvent was removed in vacuo to afford title compound as white solid 2.46 g. MS (m/z): 147 (M+H-Boc)+, 134676-67-8

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 134676-67-8, we look forward to future research findings about .

Reference£º
Patent; HUTCHISON MEDIPHARMA LIMITED; Su, Wei-Guo; Deng, Wei; Ji, Jianguo; US2014/121200; (2014); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 39093-93-1, name is Thiomorpholine 1,1-dioxide. This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 39093-93-1

1-tert-Butoxycarbonyl-3-oxocyclobutanamine (lg, 5mm0l) and 1,1-dioxythiomorpholine (0.8g, 5mmol) were dissolved in 1,2-dichloroethane (30mL) Sodium triacetoxyborohydride (lg, 20 mmOl) was added and stirred at room temperature for 8 hours. The reaction solution was concentrated to dryness.Purified by silica gel column chromatography,A white solid (0.92 g, 92percent) was obtained.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; Shanghai Xiangjin Biological Technology Co., Ltd.; Sun Fang; Zhan Youni; (53 pag.)CN108341814; (2018); A;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

76176-87-9, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 76176-87-9

To the stirred solution of [cis-3-(4-amino-5-iodo-pyrrolo [2,3-d]pyrimidin-7-yl)-cyclobutyl] methanol (Intermediate M: 348 mg, 1.0 mmol) and acetonitrile (70 mL) was added IBX (Atlantic SciTech 86900: 561 mg, 2.0 mmol, 2 eq). The reaction mixture was stirred for 1 h at 80 C. Th e reaction mixture was filtered at 40 C and the filtrate was concentrated. To the residue was added subsequently DCM (50 ml_), ethyl-diisopropyl-amine (3.43 ml_, 20 mmol, 20 eq), 1-oxide thiomorpholin hydrochloride (312 mg, 2.0 mmol, 2 eq) and sodium triacetoxyborohy- dride (637 mg, 3.0 mmol, 3 eq) with stirring at rt. The reaction mixture was stirred for 1 h at rt and then partitioned between NaHC03 1M and EtOAc. The combined organic layers were washed with water and brine, dried (Na2S04), filtered and concentrated. The residue was purified by silica gel column chromatography (DCM/MeOH/NH3aq, 200:20:1) to afford 238 mg of the title compound as pale yellow crystals: HPLC-MS: M+H = 446.2 (Rt = 0.41) (Method X); TLC; Rf = 0.26 (DCM/MeOH/NH3aq, 200:20: 1).

According to the analysis of related databases, 76176-87-9, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; NOVARTIS AG; IRM LLC; CHEN, Bei; FAIRHURST, Robin, Alec; FLOERSHEIMER, Andreas; FURET, Pascal; GUAGNANO, Vito; JIANG, Songchun; LU, Wenshuo; MARSILJE, Thomas, H.; MCCARTHY, Clive; MICHELLYS, Pierre-Yves; STAUFFER, Frederic; STUTZ, Stefan; VAUPEL, Andrea; WO2011/29915; (2011); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Thiomorpholin-3-one, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 20196-21-8

Preparation 4 4-(3,4-Dichlorophenyl)-thiomorpholin-3-one Under a nitrogen atmosphere in a flame-dried flask, sodium hydride (72 mg, 1.79 mmol, 60% oil dispersion) was washed with hexanes and then treated with 6 mL of anhydrous DMF, and cooled to 0 C. Thiomorpholin-3-one (200 mg, 1.71 mmol) was added in one portion with stirring. After gas evolution had stopped (ca. 30 min), 4-iodo-1,2-dichlorobenzene (700 mg, 2.56 mmol) was added, followed after 5 minutes by copper (I) bromide (490 mg, 3.42 mmol). After heating at 75 C. overnight, the mixture was partitioned between ethyl acetate and 1N lithium chloride, filtered through diatomaceous earth and combined with additional ethyl acetate washes of the diatomaceous earth filter cake. The organic layers were washed with additional 1N lithium chloride, brine (saturated sodium chloride) and dried over calcium sulfate (CaSO4). Concentration in vacuo gave 363 mg of light brown oil which was flash chromatographed (30-50% ethyl acetate in hexanes) to give a white solid, 108 mg. 1H-NMR (CDCl3, 400 MHz) d 7.44 (1H, d), 7.37 (1H, s), 7.12 (1H, dd), 3.93 (2H, t), 3.43 (2H, s), 3.01 (2H, t).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 20196-21-8. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Gibbs, Megan Ann; Howard, Harry Ralph; Sprouse, Jeffrey Scott; Schachter, Joel Barry; Chappell, Phillip Branch; US2002/49214; (2002); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 39093-93-1

Example 224-(1,1-Dioxo-thiomorpholine-4-carbonyl)-2-methyl-2H-pyrazole-3-carboxylic acid (2-phenyl-[1,2,4]triazolo[1,5-a]pyridin-7-yl)-amideA mixture of 1-methyl-5-(2-phenyl-[1,2,4]triazolo[1,5-a]pyridin-7-ylcarbamoyl)-1H-pyrazole-4-carboxylic acid (100 mg, 276 mumol), thiomorpholine-1,1-dioxide (44.8 mg, 331 mumol), diisopropylethylamine (145 mul, 828 mumol) and propylphosphonic anhydride (50percent in ethyl acetate, 407 mul, 690 mumol) in tetrahydrofurane (7.00 ml) is stirred for 4 hours at 70¡ã C. and then for 60 hours at 25¡ã C. under nitrogen atmosphere.The solvent is evaporated and to the residue is added sat. aqueous sodium hydrogencarbonate solution.The mixture is stirred for 20 minutes while a white solid precipitates.The solid is collected by filtration, washed with diethylether and dried affording 4-(1,1-dioxo-thiomorpholine-4-carbonyl)-2-methyl-2H-pyrazole-3-carboxylic acid (2-phenyl-[1,2,4]triazolo[1,5-a]pyridin-7-yl)-amide (112 mg, 84.7percent) as a white solid. mp.: >250¡ã C. MS: m/z=480.2 (M+H+).

According to the analysis of related databases, 39093-93-1, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Flohr, Alexander; Gobbi, Luca; Groebke Zbinden, Katrin; Koerner, Matthias; Peters, Jens-Uwe; US2012/142665; (2012); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39093-93-1, name is Thiomorpholine 1,1-dioxide. A new synthetic method of this compound is introduced below. 39093-93-1

Step 2 Preparation of (1R,3aS,5aR,5bR,7aR,11aR,11bR,13aR,13bR)-3a-((2-(1,1-dioxidothiomorpholino)ethyl)amino)-5a,5b,8,8,11a-pentamethyl-1-(prop-1-en-2-yl)octadecahydro-1H-cyclopenta[a]chrysen-9(5bH)-one To a solution of (1R,3aS,5aR,5bR,7aR,11aR,11bR,13aR,13bR)-3a-(aziridin-1-yl)-5a,5b,8,8,11a-pentamethyl-1-(prop-1-en-2-yl)octadecahydro-1H-cyclopenta[a]chrysen-9(5bH)-one (4.0 g, 8.85 mmol) and thiomorpholine 1,1-dioxide (4.79 g, 35.4 mmol) in toluene (30 mL) was added boron trifluoride diethyl etherate (1 mL in 100 mL of toluene, 10 mL) forming a yellow suspension. The mixture was sonicated for 2 min, then stirred at RT for 5 days. The reaction mixture was diluted with EtOAc (200 mL), washed with NaHCO3 (200 mL), dried over Na2SO4, filtered and concentrated in vacuo. The crude product was purified by a silica gel column (160 gm) eluted with 20-50percent of EtOAc/Hexane to give desired ketone (2.95 g, 57percent) as a solid. MS: m/e 587.5 (M+H)+, 2.39 min (method 4). 1H NMR (400 MHz, CHLOROFORM-d) delta 4.74-4.70 (m, 1H), 4.62-4.59 (m, 1H), 3.11-2.99 (m, 7H), 2.72-2.36 (m, H), 1.98-0.82 (m. 23H), 1.69 (s, 3H), 1.08 (s, 6H), 1.04 (s, 3H), 0.98 (s, 3H), 0.95 (s, 3H).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; Swidorski, Jacob; Meanwell, Nicholas A.; Regueiro-Ren, Alicia; Sit, Sing-Yuen; Chen, Jie; Chen, Yan; US2013/210787; (2013); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem