Some tips on 39093-93-1

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 39093-93-1,the Thiomorpholine, compound., 39093-93-1

A mixture of thiomorpholine 1,1-dioxide (270 mg, 2.0 mmol) in DMF (10 ml) was prepared at room temperature and sodium hydride (60 wtpercent in oil, 96 mg, 2.40 mmol) added in one portion and the mixture stirred at room temperature for 1h. 1-Bromo-4-(bromomethyl)benzene was then added in one portion and the mixture stirred overnight for 17.5 h under argon. The mixture was then quenched with saturated aqueous ammonium chloride solution (10 ml) and diluted with ethyl acetate (30 ml). The mixture was partitioned and the aqueous layer removed. The organic layers were then washed with 5percent aqueous lithium chloride solution (2x 10 ml), brine (10 ml), dried over magnesium sulphate and the solvent removed under reduced pressure. The crude product was then purified by column (0-5percent methanol/dichloromethane) to afford 4-(4- bromobenzyl)thiomorpholine 1,1-dioxide as a colourless solid (283 mg, 0.93 mmol,47percent). 1H NMR (500 MHz; CDCl3) delta 2.98 (brs, 4H), 3.06 (brs, 4H), 3.60 (5, 2H), 7.20 (d, 2H, J 8.1 Hz), 7.47 (d, 2H, J= 8.3 Hz) ppm.Purity by LCMS (UV Chromatogram, 190-450nm) 95percent, rt = 5.0 min m/z 306 (M+H)+, 39093-93-1

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; UNIVERSITY OF DUNDEE; GILBERT, Ian Hugh; NORCROSS, Neil; BARAGANA RUIBAL, Beatriz; PORZELLE, Achim; WO2013/153357; (2013); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Share a compound : 134676-67-8

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 134676-67-8, we look forward to future research findings about .

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 134676-67-8, name is N-Boc-2-thiomorpholinecarboxylic Acid. This compound has unique chemical properties. The synthetic route is as follows. 134676-67-8

To a solution of 4-(tert-butoxycarbonyl)thiomorpholine-2-carboxylic acid (0.8 g, 3.24 mmol) in anhydrous THF (20 mL) was added slowly at 0 C. BH3 solution (1 M in THF, 13.2 mL). The reaction mixture was stirred at RT overnight then quenched with saturated NaHCO3 (50 mL). The aqueous layer was extracted with EtOAc (2¡Á50 mL). The combined organic layers were washed with brine and dried (MgSO4), filtered and concentrated in vacuo to afford tert-butyl 2-(hydroxymethyl)thiomorpholine-4-carboxylate (0.75 g, crude) as colorless oil, which was used without further purification.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 134676-67-8, we look forward to future research findings about .

Reference£º
Patent; GENENTECH, INC.; Rudolph, Joachim; Gazzard, Lewis J.; Crawford, James J.; Ndubaku, Chudi; Drobnick, Joy; Lee, Wendy; US2015/31674; (2015); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Analyzing the synthesis route of 39093-93-1

According to the analysis of related databases, 39093-93-1, the application of this compound in the production field has become more and more popular.

39093-93-1, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 39093-93-1

To the acetonitrile (7.4 mL) solution of thiomorpholine 1,1-dioxide (0.500 g, 3.70 mmol) in ice-cold condition, triphosgene (1.10 g, 3.70 mmol) was added under an argon gas atmosphere , and the mixture was stirred overnight at room temperature. Hexane was added to the reaction solution and a solid obtained by concentration is sonicated. The solid was collected by filtration, washed with hexane, and dried under reduced pressure,The title compound was obtained (white solid, 0.731 g, 3.70 mmol, quantitative).

According to the analysis of related databases, 39093-93-1, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; CHIBA UNIVERSITY; YAKULTHONSHA COMPANY LIMITED; TAKAYAMA, HIROMITSU; YASOBU, NAOKO; KITAJIMA, MARIKO; YAEGASHI, TAKASHI; MATSUZAKI, TAKESHI; NAGAOKA, MASATO; HASHIMOTO, SHUSUKE; NISHIYAMA, HIROYUKI; SUGIMOTO, TAKUYA; ONO, MASAHIRO; (176 pag.)JP5829520; (2015); B2;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Application of 2,3-Dihydrobenzo[b][1,4]dioxine-5-carboxylic acid

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 114525-81-4, name is (R)-4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows. 114525-81-4

To a 25 mL round bottom flask, Intermediate 7 (540 mg, 1.45 mmol), Intermediate 9 (359 mg, 1.45 mmol), EDCI (418 mg, 2.18 mmol), HOBt (294 mg, 2.18 mmol), DIEA (374 mg, 2.9 mmol) and tetrahydrofuran (9 mL) were added, and stirred at room temperature overnight. Thereafter, the reaction product was subjected to vacuum distillation for removal of solvent, dissolved with water, and extracted 3 times with ethyl acetate. The extracts were combined, washed 3 times with saturated brine, concentrated, and separated through a silica gel column (eluent: petroleum ether/ethyl acetate), to give 688 mg of a white foamy solid product, yield 78.8%.1H-NMR (400 MHz, CDCl3) delta ppm: 7.42 (1H, d, J=1.12 Hz), 7.27 (2H, m), 5.75 (1H, s), 5.19 (1H, s), 4.58 (2H, s), 3.95-3.44 (10H, brm), 3.12 (1H, m), 2.82 (2H, m), 2.43 (2H, m), 1.92 (9H, s); EI-MS (m/z): 601.1 [M+H]+., 114525-81-4

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Reference£º
Patent; Li, Song; Wang, Ying; Xiao, Junhai; Ma, Dalong; Gong, Hongwei; Qi, Hui; Wang, Lili; Ling, Xiaomei; Zheng, Zhibing; Zhang, Yang; Zhong, Wu; Li, Meina; Xie, Yunde; Xu, Enquan; Li, Xingzhou; Ma, Jing; Zhao, Guoming; Zhou, Xinbo; Wang, Xiaokui; Liu, Hongying; US2015/126500; (2015); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Some tips on 39093-93-1

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

39093-93-1, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 39093-93-1

Step 2 Preparation of (1R,3aS,5aR,5bR,7aR,11aR,11bR,13aR,13bR)-3a-((2-(1,1-dioxidothiomorpholino)ethyl)amino)-5a,5b,8,8,11a-pentamethyl-1-(prop-1-en-2-yl)octadecahydro-1H-cyclopenta[a]chrysen-9(5bH)-one To a solution of (1R,3aS,5aR,5bR,7aR,11aR,11bR,13aR,13bR)-3a-(aziridin-1-yl)-5a,5b,8,8,11a-pentamethyl-1-(prop-1-en-2-yl)octadecahydro-1H-cyclopenta[a]chrysen-9(5bH)-one (4.0 g, 8.85 mmol) and thiomorpholine 1,1-dioxide (4.79 g, 35.4 mmol) in toluene (30 mL) was added boron trifluoride diethyl etherate (1 mL in 100 mL of toluene, 10 mL) forming a yellow suspension. The mixture was sonicated for 2 min, then stirred at RT for 5 days. The reaction mixture was diluted with EtOAc (200 mL), washed with NaHCO3 (200 mL), dried over Na2SO4, filtered and concentrated in vacuo. The crude product was purified by a silica gel column (160 gm) eluted with 20-50percent of EtOAc/Hexane to give desired ketone (2.95 g, 57percent) as a solid. MS: m/e 587.5 (M+H)+, 2.39 min (method 4). 1H NMR (400 MHz, CHLOROFORM-d) delta 4.74-4.70 (m, 1H), 4.62-4.59 (m, 1H), 3.11-2.99 (m, 7H), 2.72-2.36 (m, H), 1.98-0.82 (m. 23H), 1.69 (s, 3H), 1.08 (s, 6H), 1.04 (s, 3H), 0.98 (s, 3H), 0.95 (s, 3H).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; Swidorski, Jacob; Meanwell, Nicholas A.; Regueiro-Ren, Alicia; Sit, Sing-Yuen; Chen, Jie; Chen, Yan; US2013/210787; (2013); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Simple exploration of 39093-93-1

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

39093-93-1, Dissolved a mixture of 1 ,4-dibromobenzene (10.014 g, 42.4 mmol) and thiomorpholine 1 ,1 – dioxide (5.16 g, 38.2 mmol) in dioxane (150 mL), then added Pd(OAc)2 (959 mg, 4.24 mmol), BINAP (racemic) (2.64 g, 4.24 mmol), and CS2CO3 (41.48 g, 127 mmol). The reaction mixture was degassed several times then connected to a reflux condensor under nitrogen and heated to 100 ¡ãC for overnight. The reaction was cooled to RT then filtered through celite, and washed with EtOAc. The resulting solution was concentrated under reduced pressure and the residue was purified by flash chromatography on silica gel (0-50percent EtOAc in hexanes) to yield the desired 4-(4-Bromophenyl)thiomorpholine 1 ,1 -dioxide as a light yellow solid. MS (ES, m/z): 292.1 (M + 1).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; STACHEL, Shawn; PAONE, Daniel, V.; LI, Jing; GINNETTI, Anthony; FU, Jianmin; XU, Shimin; WO2015/123089; (2015); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Some tips on Thiomorpholine 1,1-dioxide

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

Into a 250-mL round-bottom flask, was placed a solution of (2S)-4-[(tert-butyldiphenylsilyl)oxy]-2-[[4-(4-fluorophenyl)phenyl]formamido]butanoic acid (2 g, 3.60 mmol, 1.00 equiv) in tetrahydrofuran (50 mL), DEPBT (1.62 g, 5.41 mmol, 1.50 equiv). This was followed by the addition of imidazole (370 mg, 5.44 mmol, 1.50 equiv). stirred for 40 min at 0¡ã C. To this was added a solution of thiomorpholine-1,1-dioxide (890 mg, 6.58 mmol, 1.50 equiv) in tetrahydrofuran (20 mL) dropwise with stirring at 0¡ã C. in 30 min. The resulting solution was stirred for 16 h at 25¡ã C. The resulting mixture was concentrated under vacuum. The resulting solution was diluted with 50 mL of H2O. The resulting solution was extracted with 3¡Á50 mL of ethyl acetate and the organic layers combined. The residue was applied onto a silica gel column with ethyl acetate/petroleum ether (1:1). This resulted in 2 g (82percent) of (1) as a off-white solid.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Patent; Imago Biosciences, Inc.; Rienhoff, JR., Hugh Y.; McCall, John M.; Clare, Michael; Celatka, Cassandra; Tapper, Amy E.; (226 pag.)US2016/237043; (2016); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Application of 6-Bromo-1,2,3,4-tetrahydroisoquinoline hydrochloride

The chemical industry reduces the impact on the environment during synthesis, 123-90-0, I believe this compound will play a more active role in future production and life.

123-90-0, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 123-90-0

Example 11 Synthesis of 1-amino-3-(1,1-dioxo-lambda6-thiomorpholin-4-yl)-propan-2-ol To the solution of thiomorpholine (5.0 g, 48.7 mmol) in HOCH3 (200 mL) was added the solution of oxone (36.0 g, 58.5 mmol) in H2O (100 mL). The mixture was well stirred at 40¡ã C. for 48 h and then cooled to 0¡ã C. Aqueous NaOH was added dropwise to adjust pH=12. Solid was filtered out and washed with HOCH3 (3*40 mL). The combined liquid was condensed and purified by flash chromatograph on silica gel (CHCl3/CH30H/NH3.H2O=3/1/0.1-2/1/0.1) to give thiomorpholine 1,1-dioxide (6.2 g)in 93percent yield. 1H NMR (DMSO-d6) delta 2.97 (m, 4H), 3.07 (m, 4H), 3.42 (brs, 1H), MS (m/z) 136 (M+1)., 123-90-0

The chemical industry reduces the impact on the environment during synthesis, 123-90-0, I believe this compound will play a more active role in future production and life.

Reference£º
Patent; SUGEN, INC.; US2003/92917; (2003); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Some tips on Thiomorpholine 1,1-dioxide

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 39093-93-1, name is Thiomorpholine 1,1-dioxide. This compound has unique chemical properties. The synthetic route is as follows. 39093-93-1

Example 4 Preparation of Form A 700.0 g of 6-[3-(4-fluoro-phenyl)-5-methyl-isoxazol-4-ylmethoxy]-nicotinic acid (Ex. 1 step f), 10 L of THF and 469.0 g of 1,1-carbodiimidazol were stirred at ambient temperature for one hour. 407.0 g of thiomorpholine-S,S-dioxide, 12.0 g of 4-dimethylaminopyridine and 340 mL of triethylamine p.a. were added successively and refluxed under stirring over two nights. Additional 82.0 g of thiomorpholine-S,S-dioxide and 68.0 mL of triethylamine p.a. were added and further refluxed under stirring overnight (o.n.). The experiment was cooled down to approx. 30 C. 10 L of desalinated water and 16 L of ethanol were added successively. The emerging solution was cooled down to 20 C., seeded with 12 g of Form A and stirred at ambient temperature for 30 min. The suspension was reduced to 16 L at max. 35 C. In order to replace THF, 20 L of ethanol were added. The suspension was stirred at ambient temperature o.n. and then filtrated. The filter cake was rinsed with 7.4 L of a 1:1 desalinated water/ethanol mixture and dried at 50 C. o.n. yielding 820 g of Form A (86%).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; Hoffmann-La Roche Inc.; Dott, Pascal; Grassmann, Olaf; Kammerer, Michael; Manns, Joachim; Schwitter, Urs; Thomas, Andrew; Wyttenbach, Nicole; US2013/172329; (2013); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Downstream synthetic route of Thiomorpholine-1-oxide hydrochloride

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 76176-87-9, we look forward to future research findings about .

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 76176-87-9, name is Thiomorpholine-1-oxide hydrochloride. This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 76176-87-9

To the stirred solution of 3-(4-amino-5-iodo-pyrrolo[2,3-d]pyrimidin-7-yl)-cyclobutanone (Intermediate BG; 680 mg, 2.05 mmol), 1.2-dichloroethane (55 ml) and diisopropylethylamine (1.79 ml, 10.25 mmol) was subsequently added 1-oxo-thiomorpholine hydrochloride (638 mg, 4.10 mmol) and sodium triacetoxyborohydride (652 mg, 3.08 mmol) at 0 C. The reaction mixture was stirred for 1 h at room temperature and then poured into the stirred mixture of water (150 ml) and EtOAc (150 ml). The precipitate was filtered and washed with water and EtOAc. The solid collected was dried in vacuo to afford the title compound as beige crystals. HPLC-MS: M+H = 432.1 (R, = 0.43); TLC; Rf = 0 36 (DCM/MeOH/NH3aq, 200:20:1).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 76176-87-9, we look forward to future research findings about .

Reference£º
Patent; NOVARTIS AG; IRM LLC; CHEN, Bei; FAIRHURST, Robin, Alec; FLOERSHEIMER, Andreas; FURET, Pascal; GUAGNANO, Vito; JIANG, Songchun; LU, Wenshuo; MARSILJE, Thomas, H.; MCCARTHY, Clive; MICHELLYS, Pierre-Yves; STAUFFER, Frederic; STUTZ, Stefan; VAUPEL, Andrea; WO2011/29915; (2011); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem