New learning discoveries about 20196-21-8

According to the analysis of related databases, 20196-21-8, the application of this compound in the production field has become more and more popular.

20196-21-8, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 20196-21-8

Preparation 5 4-(4-Trifluoromethylphenyl)-thiomorpholin-3-one A mixture of thiomorpholin-3-one (500 mg, 4.27 mmol), 4-trifluoromethyl-1-iodobenzene (1.25 mL, 8.5 mmol) and copper metal (814 mg, 12.8 mmol) was heated in a sealed glass tube at 185-200 C. for 18 hours. The residue was then purified by flash chromatography to give 260 mg of the title product as a white solid. M.p. 85-87 C. Mass spectrum 262 (M+1). 1H-NMR (CDCl3, 400 MHz) d 7.62 (2H, d), 7.37 (2H, d), 3.97 (2H, t), 3.43 (2H, s), 3.01 (2H, t).

According to the analysis of related databases, 20196-21-8, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Pfizer INC; US6423708; (2002); B1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Analyzing the synthesis route of 39093-93-1

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Adding a certain compound to certain chemical reactions, such as: Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 39093-93-1,the Thiomorpholine, compound., 39093-93-1

Trifluoro-methanesulfonic acid 3-cyano-6,6-dimethyl-11-oxo-6,11-dihydro-5H-benzo[b]carbazol-8-yl ester (Compound B1, 30 mg, 0.069 mmol) was dissolved in 1,4-dioxane (1 mL), added with thiomorpholine 1,1-dioxide (19 mg, 2 eq.), Pd2 (dba)3 (6.3 mg, 0.1 eq.), BINAP (8.6 mg, 0.2 eq.) and K3PO4 (29 mg, 2 eq.), and stirred at 100¡ã C. overnight. The reaction solution was added to water, and then extracted with ethyl acetate. The organic layer was washed with saturated brine and dried over sodium sulfate. The drying agent was removed by filtration and the residues obtained after concentration under reduced pressure were purified by silica gel column chromatography (ethyl acetate/hexane) to obtain the target compound (white powder, 2.1 mg, 7percent). 1H-NMR (270 MHz, DMSO-d6) delta: 8. 29 (1H, d, J=8.6 Hz), 8. 07 (1H, d, J=8. 9 Hz), 8.00 (1H, s), 7. 55 (1H, dd, J=8. 5, 1. 7 Hz), 7. 34 (1H, d, J=2. 0 Hz), 7. 15 (1H, dd, J=9.1, 2.7 Hz), 4. 01 (4H, s), 3. 16 (4H, s), 1. 77 (6H, s).LCMS: m/z 420 [M+H]+

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; Chugai Seiyaku Kabushiki Kaisha; US2012/83488; (2012); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Application of Thiomorpholine-1-oxide hydrochloride

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

39093-93-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, it is a common compound, a new synthetic route is introduced below.

The above acteyl chloride (1.122 g; 3.27 mmol) was dissolved in 10 mL DMF. Thiomorpholine 1,1-dioxide (0.442 g; 3.27 mmol) was added followed by DIPEA (0.63 mL; 3.6 mol) and DMAP (16 mg; 0.131 mmol). The reaction mixture was heated in a 60¡ã C. oil bath overnight. Water was added to the reaction mixture, and it was extracted with EtOAc three times. The organics were combined and washed with brine, dried over anhydrous sodium sulfate, filtered and concentrated. The yellow residue obtained was purified by flash column chromatography on silica gel using 2.5percent methanol in DCM mixture as eluent then switched to 5percent methanol in DCM. The title compound was obtained in >95percent purity (HPLC) as a white foam (781 mg; 54percent yield)., 39093-93-1

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; BOEHRINGER INGELHEIM INTERNATIONAL GMBH; US2010/9964; (2010); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Some tips on 39093-93-1

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

1.1.1. 4-[4-(4,4,5,5-Tetramethyl-[1,3,2]dioxaborolan-2-yl)-benzyl]-thiomorpholine-1,1-dioxide 2-(4-Bromomethyl-phenyl)-4,4,5,5-tetramethyl-[1,3,2]dioxaborolane (1 eq) and DIPEA (2 eq) are dissolved in DCM/MeOH (5:1 v:v) under N2 and thiomorpholine 1,1-dioxide (2 eq) is added portionwise. The resulting solution is stirred at room temperature for 16 h. After this time, the reaction is complete. The solvent is evaporated. The compound is extracted with EtOAc and water, washed with brine and dried over anhydrous MgSO4. Organic layers are filtered and evaporated. The final compound is isolated without further purification.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Patent; SABOURAULT, Nicolas Luc; DE FAVERI, Carla; SHEIKH, Ahmad; US2015/225398; (2015); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Downstream synthetic route of 114525-81-4

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 114525-81-4, name is (R)-4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows. 114525-81-4

(Scheme F, F-3: where RF-1 and RF-2 are the same and equal to proton, RF-3 is CH3, R5 is 4-[(2,6-dichlorobenzoyl)amino]phenyl and stereochemistry is (R,S)). [C00175] [00415] To a cooled (0 C.) solution of Boc-L-thiomorpholine-3-carboxylic acid ((a) Van Der Auwera, C.; Anteunis, M. J. O. Iit. J. Peptide Protein Res. 1987, 29, 574: (b) Kogami, Y.; Okawa, K. Bull. Chem. Soc. Jpn. 1987, 60, 2963: (c) Larsson U.; Carlson R. ACTA Chemica. Scand. 1994, 48, 517: (d) Carson J. F.; Wong F. F. J. Org. Chem. 1964, 29, 2203.) (Scheme F, F-1: where RF-1 and RF-2 are the same and equal to proton and stereochemistry is (R)) (6.7 g, 27 mmol) in CH2Cl2 (100 mL) was added HOBt (4.0 g, 29.7 mmol), DMAP (700 mg), EDC (5.7 g, 29.7 mmol) and triethylamine (13.5 mL, 97 mmol). The reaction mixture was stirred for 10 min, then the amino acid derivative F-2 (Scheme F, where R5 is 4-[(2,6-dichlorobenzoyl)amino]phenyl, RF-3 is CH3, and stereochemistry is (S)) (10.0 g, 24.7 mmol) was added. After 20 h, volatiles were removed in vacuo and the residue partitioned between 2.5% aqueous HCl (100 mL) and H2O (100 mL). The organic layer was separated and washed saturated aqueous NaHCO3 (100 mL), dried and concentrated in vacuo. Purification of the residue by chromatography on SiO2 (500 g) using CH2Cl2/ethyl acetate (10%) as eluent afforded the title compound (12.31 g) as a solid: 1H NMR (CDCl3) delta 1.44 (9H), 2.35 (1H), 2.70 (3H), 3.13 (2H), 3.33 (1H), 3.77 (3H), 4.22 (1H), 5.00 (1H), 6.48 (1H), 7.18 (2H), 7.31 (3H), 7.44 (1H), 7.56 (2H); 13C NMR (CDCl3) delta 171.6, 168.9, 162.5, 136.5, 135.9, 132.4, 131.0, 130.2, 128.2, 120.5, 81.7, 77.3, 53.3, 52.6, 37.0, 28.2, 26.5; IR (mull) 3296, 2924, 1744, 1685, 1668, 1605, 1536, 1515, 1432, 1412, 1321, 1294, 1260, 1244, 1213, 1195, 1161, 798 cm-1; MS (FAB) m/z (rel. intensity) 598 (M+H, 3), 596 (M+H, 5), Anal. Calcd for C27H31Cl2N3O6S: C, 54.36; H, 5.24; N, 7.04. Found: C, 54.23; H, 5.24; N, 6.86. Corrected for 0.60% H2O, found by Karl Fischer analysis.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Reference£º
Patent; Pharmacia & Upjohn Company; Tanabe Seiyaku Co., Ltd.; US6685617; (2004); B1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Brief introduction of 39093-93-1

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

A mixture of l-methyl-5-(2-phenyl-[l,2,4]triazolo[l,5-a]pyridin-7-ylcarbamoyl)-lH-pyrazole-4- carboxylic acid (100 mg, 276 muiotaetaomicron), thiomorpholine- 1,1 -dioxide (44.8 mg, 331 muiotaetaomicron) , diisopropylethylamine (145 mu, 828 mumol) and propylphosphonic anhydride (50percent in ethyl acetate, 407 mu, 690 muiotaetaomicron) in tetrahydrofurane (7.00 ml) is stirred for 4 hours at 70 ¡ãC and then for 60 hours at 25 ¡ãC under nitrogen atmosphere. The solvent is evaporated and to the residue is added sat. aqueous sodium hydrogencarbonate solution. The mixture is stirred for 20 minutes while a white solid precipitates. The solid is collected by filtration, washed with diethylether and dried affording 4-( 1 , 1 -dioxo-thiomorpholine-4-carbonyl)-2-methyl-2H-pyrazole-3-carboxylic acid (2-phenyl-[l,2,4]triazolo[l,5-a]pyridin-7-yl)-amide (112 mg, 84.7percent) as a white solid, mp.: > 250¡ãC. MS: m/z= 480.2 (M+H+)., 39093-93-1

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Patent; F. HOFFMANN-LA ROCHE AG; FLOHR, Alexander; GOBBI, Luca; GROEBKE ZBINDEN, Katrin; KOERNER, Matthias; PETERS, Jens-Uwe; WO2012/76430; (2012); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Downstream synthetic route of 4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 128453-98-5. We look forward to the emergence of more reaction modes in the future.

4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 128453-98-5

To the reaction flask was added 1-tert-butoxycarbonylthiomorpholine-2-carboxylic acid (2.47 g, 10 mmol)And dichloromethane (20 mL),After stirring and dissolving,Ice bath cooling,Triethylamine (1.55 mL, 11 mmol) was added in turn,Isobutyl chloroformate (1.503 g, 11 mmol),After the reaction under ice bath for 1 hour,2,6-dimethylaniline 3a (1.51 g, 12.5 mmol) was added,The reaction was stirred at room temperature for 6 hours.(30 mL) and dichloromethane (20 mL) were added thereto, and the aqueous layer was extracted with dichloromethane (20 mL x 3). The organic phases were combined, dried over anhydrous sodium sulfate, filtered, and the filtrate was concentrated under reduced pressure. Chromatography Separation and Purification (petroleum ether / ethyl acetate (v / v) = 5: 1-1: 1)To give a pale yellow solidTert-butyl 3 – ((2,6-dimethylphenyl) carbamoyl) thiomorpholine-4-carboxylate (40a) (1.57 g, yield 44.7%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 128453-98-5. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Sichuan Hai Sike Pharmaceutical Co., Ltd.; Wang Wei; Chen Lei; Wang Wenjing; Wei Yonggang; Liu Zhenhong; Qin Linlin; (74 pag.)CN106928127; (2017); A;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

New learning discoveries about 39093-93-1

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 39093-93-1. We look forward to the emergence of more reaction modes in the future.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

Example 224-(1,1-Dioxo-thiomorpholine-4-carbonyl)-2-methyl-2H-pyrazole-3-carboxylic acid (2-phenyl-[1,2,4]triazolo[1,5-a]pyridin-7-yl)-amideA mixture of 1-methyl-5-(2-phenyl-[1,2,4]triazolo[1,5-a]pyridin-7-ylcarbamoyl)-1H-pyrazole-4-carboxylic acid (100 mg, 276 mumol), thiomorpholine-1,1-dioxide (44.8 mg, 331 mumol), diisopropylethylamine (145 mul, 828 mumol) and propylphosphonic anhydride (50percent in ethyl acetate, 407 mul, 690 mumol) in tetrahydrofurane (7.00 ml) is stirred for 4 hours at 70¡ã C. and then for 60 hours at 25¡ã C. under nitrogen atmosphere.The solvent is evaporated and to the residue is added sat. aqueous sodium hydrogencarbonate solution.The mixture is stirred for 20 minutes while a white solid precipitates.The solid is collected by filtration, washed with diethylether and dried affording 4-(1,1-dioxo-thiomorpholine-4-carbonyl)-2-methyl-2H-pyrazole-3-carboxylic acid (2-phenyl-[1,2,4]triazolo[1,5-a]pyridin-7-yl)-amide (112 mg, 84.7percent) as a white solid. mp.: >250¡ã C. MS: m/z=480.2 (M+H+).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 39093-93-1. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Flohr, Alexander; Gobbi, Luca; Groebke Zbinden, Katrin; Koerner, Matthias; Peters, Jens-Uwe; US2012/142665; (2012); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Downstream synthetic route of 39093-93-1

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

To the acetonitrile (7.4 mL) solution of thiomorpholine 1,1-dioxide (0.500 g, 3.70 mmol) in ice-cold condition, triphosgene (1.10 g, 3.70 mmol) was added under an argon gas atmosphere , and the mixture was stirred overnight at room temperature. Hexane was added to the reaction solution and a solid obtained by concentration is sonicated. The solid was collected by filtration, washed with hexane, and dried under reduced pressure,The title compound was obtained (white solid, 0.731 g, 3.70 mmol, quantitative).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Patent; CHIBA UNIVERSITY; YAKULTHONSHA COMPANY LIMITED; TAKAYAMA, HIROMITSU; YASOBU, NAOKO; KITAJIMA, MARIKO; YAEGASHI, TAKASHI; MATSUZAKI, TAKESHI; NAGAOKA, MASATO; HASHIMOTO, SHUSUKE; NISHIYAMA, HIROYUKI; SUGIMOTO, TAKUYA; ONO, MASAHIRO; (176 pag.)JP5829520; (2015); B2;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

The important role of 76176-87-9

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 76176-87-9, we look forward to future research findings about .

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 76176-87-9, name is Thiomorpholine-1-oxide hydrochloride. A new synthetic method of this compound is introduced below. 76176-87-9

Intermediate 7 (17.86 g, 44.7 mmol), 1-oxide thiomorpholine hydrochloride (10.5 g, 67.1 mmol, 1.5 eq) and NaOAc (5.87 g, 71.5 mmol, 1.6 eq) weresuspended in anhydrous CH2CI2 (450 mL) under Ar(g). The reaction mixture was then refluxed for 6 h, then cooled down to rt and NaBH(OAc)3 (16.1 g, 76 mmol, 1 .7 eq) was slowly added over 15 mins. The mixture was left to stir at rt for 18 h. The mixture was then re-charged with 1-oxide thiomorpholine hydrochloride (10.5 g, 67.1 mmol, 1.5 eq), NaOAc (5.87 g, 71.5 mmol, 1.6 eq) andNaBH(OAc)3 (16.1 g, 76 mmol, 1.7 eq). After 6 h stirring, the mixture was quenched with H20 (300 mL) and extracted with CH2CI2 (2 x 300 mL). The combined organic extracts were washed with 50% brine (50 mL) then dried over MgSO4 and the solvent was removed in vacuo. Pd-scavenge was carried out in CH2CI2/MeOH (1:1, 100 mL) using MP-TMT resin (18 g, 0.68 mmol/g) over 18 h.The next day, the resin was filtered off, washed with CH2CI2/MeOH (1:1, 20 mL) and the solvent was removed in vacuo. Purification by silica gel column chromatography with EtOAc/MeOH (1:0-4:1) followed by CH2CI2/MeOH (1:0-9:1) yielded Example B as an off-white solid (13.0 g, 58%).1H NMR (300MHz, DMSO-d5) oH. 11.27 (brs, 1H), 8.62 (d, J=3.2 Hz, 2H), 8.18(d, J=7.5 Hz, 1H), 7.44-7.59 (m, 3H), 7.23 (t, J=7.7 Hz, 1H), 4.13 (d, J=4.7 Hz,4H), 3.84-3.93 (m, 4H), 3.83 (5, 2H), 2.84-3.03 (m, 4H), 2.64-2.83 (m, 4H). MS (ESj 503.0 (100%, [M+H]j.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 76176-87-9, we look forward to future research findings about .

Reference£º
Patent; KARUS THERAPEUTICS LTD; SHUTTLEWORTH, Stephen Joseph; SILVA, Franck Alexandre; CECIL, Alexander Richard Liam; ALEXANDER, Rikki Peter; GATLAND, Alice Elizabeth; FINNEMORE, Daniel John; (123 pag.)WO2017/29521; (2017); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem