Category: Thiomorpholine

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.59801-62-6, Thiomorpholine 1,1-dioxide hydrochloride it is a common compound, a new synthetic route is introduced below., 59801-62-6

Phenyl N-(4-(1-(methylamino)carbonyl-1H-5-indolyloxy)-2-pyridyl)-N-(phenoxycarbonyl)carbamate (150 mg, 0.278 mmol, Production example 5-2) was dissolved in N,N-dimethylformamide (1.5 ml); 5N aqueous solution of sodium hydroxide (0.29 ml) and 1,1-dioxothiomorpholine hydrochloride (246 mg, 1.44 mmol) were added thereto; and the reaction mixture was stirred at room temperature for 5 hours. The reaction mixture was partitioned between ethyl acetate and water. The organic layer was dried over anhydrous magnesium sulfate and concentrated under reduced pressure. The residue was purified by silica gel column chromatography (Fuji Silysia BW-300, ethyl acetate). Diethyl ether was added to this to allow to crystallize; and the crystals were filtered off, washed with diethyl ether, and dried under aeration to yield the title compound as colorless crystals (100 mg, 0.226 mmol, 78.5%). 1H-NMR Spectrum (DMSO-d6) delta (ppm): 2.83 (3H, d, J=3.6 Hz), 3.10 (4H, m), 3.81 (4H, m), 6.57 (1H, dd, J=1.2, 5.6 Hz), 6.67 (1H, d, J=3.2 Hz), 7.03 (1H, dd, J=2.0, 9.2 Hz), 7.32 (1H, m), 7.36 (1H, d, J=2.0 Hz), 7.87 (1H, d, J=3.2 Hz), 8.09 (1H, d, J=5.6 Hz), 8.16 (1H, d, J=3.6 Hz), 8.28 (1H, d, J=9.2 Hz), 9.54 (1H, s).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 59801-62-6, and friends who are interested can also refer to it.

Reference£º
Patent; Eisai Co., Ltd.; EP1522540; (2005); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 114525-81-4, name is (R)-4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 114525-81-4

Trifluoroacetic acid (4 mL, 23.5 mmol) was added to a stirred solution of (R)-4-(tert- butoxycarbonyl)thiomorpholine-3-carboxylic acid (1.0 g, 4.05 mmol) in CH2CI2 (20 mL), and the reaction mixture was stirred at room temperature for 2 h. Volatile byproducts were removed at reduced pressure and the residue was concentrated from toluene (2 x 20 mL) and dried under high vacuum for 30 min. The crude residue was dissolved in 1,4-dioxane (10 mL) and water (10 mL) was added followed by NaHCC (1.02 g, 12.15 mmol) and a solution of FMOC-C1 (1.04 g, 4.05 mmol) in 1,4-dioxane (10 mL). The reaction mixture was stirred at room temperature for 16 h. The mixture was concentrated under reduced pressure to remove volatile organic solvent and the residue was washed with MTBE (2 x 20 mL). The aqueous layer was acidified with IN aqueous HC1 to pH 2 and extracted with EtOAc (3 x 50 mL). The combined organic extracts were washed with brine solution (50 mL), dried over anhydrous a2S04, filtered and concentrated. The residue was purified by reverse phase column chromatography (CI 8; eluent: 10-100% acetonitrile/water) to afford the title compound (1.00 g) as a white semi-solid.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Reference£º
Patent; MERCK SHARP & DOHME CORP.; BLIZZARD, Timothy Allen; BIFTU, Tesfaye; WO2013/148478; (2013); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 39093-93-1

To a mixture of 1-bromo-4- (bromomethyl) benzene (500 mg, 2.00 mmol) and thiomorpholine 1, 1-dioxide (513 mg, 2.99 mmol) was added THF (10 mL) and triethylamine (0.84 mL) in turn. After the mixture was stirred at rt for 15 h, the raw materail was consumed monitored by TLC. The reaction mixture was diluted with EtOAc (200 mL) and washed with saturated aqueous NaCl (50 mL) three times. The combined organic layers were concentrated in vacuo. The residue was purified by silica gel column chromatography eluted with PE/EtOAc (v/v) 3/1 to give a white solid product (310 mg, 50.9) .[0893]MS (ESI, pos. ion) m/z: 304.1 [M+1]+ and[0894]1H NMR (400 MHz, CDCl3) : delta (ppm) 7.46 (d, J 8.4 Hz, 2H) , 7.19 (d, J 8.4 Hz, 2H) , 3.59 (s, 2H) , 3.07-3.05 (m, 4H) , 2.98-2.95 (m, 4H)

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Patent; SUNSHINE LAKE PHARMA CO., LTD.; LIU, Bing; ZHANG, Yingjun; CHENG, Changchung; HUANG, Jiuzhong; BAI, Shun; REN, Xingye; LI, Zhi; ZHOU, Youbai; (368 pag.)WO2016/615; (2016); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 114525-81-4, name is (R)-4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows. 114525-81-4

To a 100 mL round bottom flask, Intermediate 15 (1.28 g, 3.28 mmol), Intermediate 9 (0.81 g, 3.28 mmol), EDCI (0.94 g, 4.92 mmol), HOBt (0.66 g, 4.92 mmol), DIEA (0.85 g, 6.56 mmol) and tetrahydrofuran (40 mL) were added, and stirred at room temperature overnight. Thereafter, the reaction product was subjected to vacuum distillation for removal of solvent, dissolved with water, and extracted 3 times with ethyl acetate. The extracts were combined, washed 3 times with saturated brine, concentrated, and separated through a silica gel column (eluent: ethyl acetate/methanol/ammonia), to give 1.63 g of a white foamy solid product, yield 80.5%.1H-NMR (400 MHz, CDCl3) delta ppm: 8.77 (1H, m), 8.02 (1H, m), 7.43 (1H, m), 7.31 (1H, m), 7.20 (1H, m), 7.05 (1H, m), 6.56 (1H, m), 4.85 (2H, d, J=5.2 Hz), 4.02-3.44 (10H, brm), 3.13 (1H, m), 2.83 (2H, m), 2.44 (2H, m), 2.02 (9H, s); EI-MS (m/z): 618.2 [M+H]+.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Reference£º
Patent; Li, Song; Wang, Ying; Xiao, Junhai; Ma, Dalong; Gong, Hongwei; Qi, Hui; Wang, Lili; Ling, Xiaomei; Zheng, Zhibing; Zhang, Yang; Zhong, Wu; Li, Meina; Xie, Yunde; Xu, Enquan; Li, Xingzhou; Ma, Jing; Zhao, Guoming; Zhou, Xinbo; Wang, Xiaokui; Liu, Hongying; US2015/126500; (2015); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39093-93-1, name is Thiomorpholine 1,1-dioxide. A new synthetic method of this compound is introduced below. 39093-93-1

[0162] 2-(4-Bromomethyl-phenyl)-4,4,5,5-tetramethyl-[l,3,2]dioxaborolane (1 eq) and DIPEA (2 eq) are dissolved in DCM/MeOH (5: 1 v:v) under N2 and thiomorpho line 1,1 -dioxide (2 eq) is added portionwise. The resulting solution is stirred at room temperature for 16 h. After this time, the reaction is complete. The solvent is evaporated. The compound is extracted with EtOAc and water, washed with brine and dried over anhydrous MgSO i. Organic layers are filtered and evaporated. The final compound is isolated without further purification.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; GALAPAGOS NV; WIGERINCK, Piet, Tom, Bert, Paul; VAN ‘T KLOOSTER, Gerben, Albert, Eleutherius; (142 pag.)WO2016/165952; (2016); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Under nitrogen atmosphere, a mixture of bromide 19 (208mg, 0.58mmol), piperidine (165muL, 1.67mmol), and triethylamine (234muL, 1.68mmol) in DMF (3mL) was subjected to microwave irradiation at 90¡ãC for 5min. The mixture was allowed to cool to room temperature, and the organic solvents were evaporated in vacuo. The residue was purified on a Biotage? KP-NH cartridge (amino-modified silica gel) using cyclohexane/EtOAc in different proportions to afford to give the title compound as a clear yellowish oil (202mg, 100percent), which darkened on standing.

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Article; Petrov, Ravil R.; Knight, Lindsay; Chen, Shao-Rui; Wager-Miller, Jim; McDaniel, Steven W.; Diaz, Fanny; Barth, Francis; Pan, Hui-Lin; Mackie, Ken; Cavasotto, Claudio N.; Diaz, Philippe; European Journal of Medicinal Chemistry; vol. 69; (2013); p. 881 – 907;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 114525-81-4, name is (R)-4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. This compound has unique chemical properties. The synthetic route is as follows. 114525-81-4

Trifluoroacetic acid (4 mL, 23.5 mmol) was added to a stirred solution of (R)-4-(tert- butoxycarbonyl)thiomorpholine-3-carboxylic acid (1.0 g, 4.05 mmol) in CH2CI2 (20 mL), and the reaction mixture was stirred at room temperature for 2 h. Volatile byproducts were removed at reduced pressure and the residue was concentrated from toluene (2 x 20 mL) and dried under high vacuum for 30 min. The crude residue was dissolved in 1,4-dioxane (10 mL) and water (10 mL) was added followed by NaHCC (1.02 g, 12.15 mmol) and a solution of FMOC-C1 (1.04 g, 4.05 mmol) in 1,4-dioxane (10 mL). The reaction mixture was stirred at room temperature for 16 h. The mixture was concentrated under reduced pressure to remove volatile organic solvent and the residue was washed with MTBE (2 x 20 mL). The aqueous layer was acidified with IN aqueous HC1 to pH 2 and extracted with EtOAc (3 x 50 mL). The combined organic extracts were washed with brine solution (50 mL), dried over anhydrous a2S04, filtered and concentrated. The residue was purified by reverse phase column chromatography (CI 8; eluent: 10-100% acetonitrile/water) to afford the title compound (1.00 g) as a white semi-solid.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 114525-81-4, we look forward to future research findings about .

Reference£º
Patent; MERCK SHARP & DOHME CORP.; BLIZZARD, Timothy Allen; BIFTU, Tesfaye; WO2013/148478; (2013); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

20196-21-8, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 20196-21-8

In the same manner, 4-(3,4-dichlorobenzyl)-thiomorpholin-3-one was prepared in 89% yield from 3,4-dichlorobenzyl bromide and thiomorpholin-3-one as a white solid. M.p. 86-87 C. 1H-NMR (CDCl3, 400 MHz) d 7.38 (1H, d), 7.33 (1H, d), 7.10 (1H, dd), 4.56 (2H, s), 3.55-3.51 (2H, m), 3.37 (2H, s), 2.81-2.76 (2H, m).

According to the analysis of related databases, 20196-21-8, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Gibbs, Megan Ann; Howard, Harry Ralph; Sprouse, Jeffrey Scott; Schachter, Joel Barry; Chappell, Phillip Branch; US2002/49214; (2002); A1;; ; Patent; Pfizer INC; US6423708; (2002); B1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Adding a certain compound to certain chemical reactions, such as: Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 39093-93-1,the Thiomorpholine, compound., 39093-93-1

To a solution of thiomorpholine 1,1-dioxide (37.4 mg, 0.277 mmol) in ethanol (1 mL) was added (S)i sopropyl 2-(6-(bromomethyl)-4-(4,4-dimethylpiperidin- l-yl)-5 -(2-(4-fluoro-2- methylbenzyl)- 1,2,3 ,4-tetrahydroi soquinolin-6-yl)-2-methylpyridin-3 -yl)-2-(tert-butoxy)acetate (20 mg, 0.028 mmol) and the resulting mixture was stirred at room temp for 16 h. Mixture was then treated with iON NaOH (0.028 mL, 0.277 mmol) at 80 ¡ãC for 4 h. Mixture was then cooled and purified by prep HPLC to afford (S)-2-(tert-butoxy)-2- (4-(4,4-dimethylpiperidin- 1 -yl)-6-((1, 1 -dioxidothiomorpholino)methyl)-5-(2-(4-fluoro-2- methylbenzyl)- 1,2,3 ,4-tetrahydroi soquinolin-6-yl)-2-methylpyridin-3 -yl)acetic acid (15.8mg, 0.021 mmol, 78 percent yield). ?HNMR (500MHz, DMSO-d6) oe 7.40-7.27 (m, 1H),7.25 -7.15 (m, 1H), 7.14-6.96 (m, 3H), 6.90 (br. s., 1H), 5.79 (br. s., 1H), 3.61 (br. s.,4H), 3.47 – 3.34 (m, 3H), 3.34 – 3.18 (m, 2H), 2.94 (br. s., 2H), 2.84 (d, J=9.9 Hz, 3H),2.77 – 2.68 (m, 6H), 2.47 (s, 3H), 2.36 (br. s., 3H), 2.12 (br. s., 1H), 1.89 – 1.79 (m, 1H),1.49 (br. s., 1H), 1.35 – 1.14 (m, 2H), 1.12 (s, 9H), 1.06-0.91 (m, 1H), 0.85 (br. s., 3H),0.61 (br. s., 3H). LCMS (M+H) = 735.1.

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; VIIV HEALTHCARE UK (NO.5) LIMITED; EASTMAN, Kyle J.; KADOW, John F.; NAIDU, B. Narasimhulu; PARCELLA, Kyle E.; PATEL, Manoj; SIVAPRAKASAM, Prasanna; TU, Yong; (275 pag.)WO2017/25915; (2017); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 128453-98-5, name is 4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid. A new synthetic method of this compound is introduced below. 128453-98-5

INTERMEDIATE 55: 1, 1-DIOXO-LA6-THIOMORPHOLINE-3, 4- dicarboxylic acid 4-TERT-BUTYL ester [00193] Thiomorpholine-3,4-dicarboxylic acid 4-tert-butyl ester (120 mg, 0.485 mmol) was dissolved in ET20 (8 ML). To the solution was added MCPBA (172 mg, 0.994 mmol), followed later by a second portion of MCPBA (84 mg, 0.485 mmol). The precipitate which formed was filtered, washed with Et20 and dried to yield a white solid of 1, 1- DIOXO-LA6-THIOMORPHOLINE-3, 4-dicarboxylic acid 4-tert-butyl ester (74 mg).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 128453-98-5, we look forward to future research findings about .

Reference£º
Patent; MILLENIUM PHARMACEUTICALS, INC.; WO2004/92167; (2004); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem