Category: Thiomorpholine

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 76176-87-9, name is Thiomorpholine-1-oxide hydrochloride. A new synthetic method of this compound is introduced below. 76176-87-9

To the stirred solution of 3-(4-amino-5-iodo-pyrrolo[2,3-d]pyrimidin-7-yl)-cyclobutanone (Step S.1 ; 680 mg, 2.05 mmol), 1.2-dichloroethane (55 ml) and diisopropylethylamine (1 .79 ml, 10.25 mmol) was subsequently added 1 -oxo-thiomorpholine hydrochloride (638 mg, 4.10 mmol) and sodium triacetoxyborohydride (652 mg, 3.08 mmol) at 0 C. The reaction mixture was stirred for 1 h at room temperature, and then poured into the stirred mixture of water (150 ml) and EtOAc (150 ml). The precipitate was filtered and washed with water and EtOAc. The solid collected was dried in vacuo to afford the title compound as beige crystals. HPLC-MS: M+H = 432.1 (R, = 0.43); TLC; R, = 0.36 (DCM/MeOH/NH3aq, 200:20:1 ).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 76176-87-9, we look forward to future research findings about .

Reference£º
Patent; NOVARTIS AG; IRM LLC; CHEN, Bai; FAIRHURST, Robin Alec; JIANG, Songchun; LU, Wenshuo; MARSILJE III, Thomas H.; MCCARTHY, Clive; MICHELLYS, Pierre-Yves; STUTZ, Stefan; WO2012/120469; (2012); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

(R)-4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 114525-81-4

To a 100 mL round bottom flask, Intermediate 15 (1.28 g, 3.28 mmol), Intermediate 9 (0.81 g, 3.28 mmol), EDCI (0.94 g, 4.92 mmol), HOBt (0.66 g, 4.92 mmol), DIEA (0.85 g, 6.56 mmol) and tetrahydrofuran (40 mL) were added, and stirred at room temperature overnight. Thereafter, the reaction product was subjected to vacuum distillation for removal of solvent, dissolved with water, and extracted 3 times with ethyl acetate. The extracts were combined, washed 3 times with saturated brine, concentrated, and separated through a silica gel column (eluent: ethyl acetate/methanol/ammonia), to give 1.63 g of a white foamy solid product, yield 80.5%. [0091] 1H-NMR (400 MHz, CDCl3) delta ppm: 8.77 (1H, m), 8.02 (1H, m), 7.43 (1H, m), 7.31 (1H, m), 7.20 (1H, m), 7.05 (1H, m), 6.56 (1H, m), 4.85 (2H, d, J = 5.2 Hz), 4.02-3.44(10H, brm), 3.13 (1H, m), 2.83 (2H, m), 2.44 (2H, m), 2.02 (9H, s); EI-MS (m/z): 618.2 [M+H]+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 114525-81-4. We look forward to the emergence of more reaction modes in the future.

Reference£º
Patent; Institute of Pharmacology and Toxicology Academy of Military Medical Sciences P.L.A. China; Peking University; LI, Song; WANG, Ying; XIAO, Junhai; MA, Dalong; GONG, Hongwei; QI, Hui; WANG, Lili; LING, Xiaomei; ZHENG, Zhibing; ZHANG, Yang; ZHONG, Wu; LI, Meina; XIE, Yunde; XU, Enquan; LI, Xingzhou; MA, Jing; ZHAO, Guoming; ZHOU, Xinbo; WANG, Xiaokui; LIU, Hongying; EP2805947; (2014); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Thiomorpholine 1,1-dioxide, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 39093-93-1

General procedure: A mixture ofmethyl 3-iodobenzoate (1 mmol), corresponding amine (3 mmol), K2CO3(4 mmol), CuI (0.2 mmol) and L-proline (0.4 mmol) in 15 mL of DMSO was heatedat 60 ¡ãC for 8 h. The cooled mixture was pour into 150 ml water, and extractedwith ethyl acetate (3 ¡Á 15 mL), the organic fractions were combined, washedwith saturated brine (2 ¡Á 15 ml) prior to drying over anhydrous sodium sulfate.After filtration and concentrate using a rotary evaporator, the residue was purified by silica gel column chromatographyusing a mixture of petroleum ether/ethyl acetate (20 : 1, v/v) as eluent toafford the desired product.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. 39093-93-1. We look forward to the emergence of more reaction modes in the future.

Reference£º
Article; Li, Zheng; Pan, Miaobo; Su, Xin; Dai, Yuxuan; Fu, Mian; Cai, Xingguang; Shi, Wei; Huang, Wenlong; Qian, Hai; Bioorganic and Medicinal Chemistry; vol. 24; 9; (2016); p. 1981 – 1987;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.39093-93-1, Thiomorpholine 1,1-dioxide it is a common compound, a new synthetic route is introduced below., 39093-93-1

A mixture isopropyl 4-((lr,4r)-4-(5-chloropyrazin-2-yloxy)cyclohexyloxy)piperidine-l- carboxylate (50 mg, 0.126 mmol), diacetoxypalladium (2.8 mg, 0.013 mmol), thiomorpholine- 1 ,1-dioxide (17 mg, 0.126 mmol), sodium 2-methylpropan-2-olate (29 mg, 0.302 mmol), and l ,l’-3/4w(di-t-butylphosphino)ferrocene (12 mg, 0.025 mmol) in 1 ,4-dioxane (0.8 mL) was heated at 100 ¡ãC for 1 h under microwave irradiation. LCMS showed product had formed and no starting material remained. Water was added to the reaction mixture and it was extracted with DCM (3 x 15 mL). The organic layer was rinsed with brine, dried with Na2S04 and concentrated to give a brown oil. The brown oil was purified using Biotage.(TM). flash chromatography and a 25 g SNAP.(TM). column, 20-100percent EtOAc-hexanes, 15 column volumes. Fractions containing product were combined and concentrated to give the title compound (25 mg, 0.050 mmol, 40.1 percent yield) as a light brown solid. ‘H NMR (CDCI3 , 400 MHz) delta 1.23 (d, J = 4 Hz, 6H), 1.46-1.55 (m, 6H), 1.77-1.82 (m, 2H), 1.96-2.01 (m, 2H), 2.09-2.14 (m, 2H), 3.06 (t, J = 4Hz , 4H), 3.09-3.16 (m, 2H), 3.48-3.52 (m, 1H), 3.54-3.59 (m, 1H), 3.78-3.84 (m, 2H), 4.06 (t, J = 4Hz , 4H), 4.85-4.94 (m, 2H), 7.73 (s, 1H), 7.82 (s, 1H), LCMS m/z: 497.6 [M+H]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 39093-93-1, and friends who are interested can also refer to it.

Reference£º
Patent; ARENA PHARMACEUTICALS, INC.; JONES, Robert M.; HAN, Sangdon; BUZARD, Daniel J.; LEHMANN, Juerg; NARAYANAN, Sanju; YUE, Dawei; WO2011/127051; (2011); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, it is a common compound, a new synthetic route is introduced below.

7-Bromo-isochroman-4-one (0.45 g, 2 mmol) and 1,1-dioxothiomorpholine (0.3 g, 2 mmol) were dissolved in 1,2-dichloroethane (30 mL) and added Sodium triacetoxyborohydride (1 g, 20 mmol) was stirred at room temperature for 8 hours. The reaction solution was concentrated to dryness.Purified by silica gel column chromatography,A white solid (0.5 g, 85percent) was obtained., 39093-93-1

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; Shanghai Xiangjin Biological Technology Co., Ltd.; Sun Fang; Zhan Youni; (53 pag.)CN108341814; (2018); A;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

39093-93-1, A common heterocyclic compound, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route., 39093-93-1

Step-E: (1R,2R)?N-(1-Cyanocyclopropyl)-2-{4-[4-(1,1-dioxo-1lambda6-thiomorpholin-4-yl)phenyl]-2-(4-fluorophenyl)-1,3-oxazol-5-yl}cyclohexanecarboxamide (Compound 7) [0274] To a mixture of (1R,2R)-2-(4-(4-bromophenyl)-2-(4-fluorophenyl)oxazol-5-yl)-N-(1-cyanocyclopropyl)cyclohexanecarboxamide (116 mg, 0.228 mmol), thiomorpholine 1,1-dioxide (93 mg, 0.685 mmol), Chloro(2-dicyclohexylphosphino-2?,4?,6?-triisopropyl-1,1?-biphenyl)[2-(2-aminoethyl)phenyl)]palladium(II) (8.43 mg, 0.011 mmol) and K3PO4.H2O (63.1 mg, 0.274 mmol) in a vial under an inert atmosphere was added THF (1.5 mL). The vial was sealed and heated at 100¡ã C. for 2 h., cooled to rt and concentrated. The residue was taken in DMSO, filtered and the filtrate was subjected to reverse phase HPLC purification (Sunfire C18 30¡Á150 mm column; 10 to 95percent MeCN in water. 0.1percent TFA modifier for MeCN and water). Desired fractions were partitioned between saturated aqueous sodium bicarbonate and dichloromethane. Layers were separated. Aqueous layer was extrated with dichloromethane (3¡Á). Combined organic solutions were dried over Na2SO4 and concentrated to give desired product as a white solid (120 mg, 93percent). MS [M+H]+ 563.1. 1H NMR (400 MHz, CDCl3) delta 8.05-8.02 (m, 2H), 7.68-7.63 (m, 2H), 7.21-7.14 (m, 2H), 7.20-6.97 (m, 2H), 5.66 (s, 1H), 3.94-3.91 (m, 1H), 3.30-3.22 (m, 1H), 3.14-3.12 (m, 4H), 2.51-2.44 (m, 1H), 2.1-1.3 (m, 10H), 0.78-0.58 (m, 2H).

According to the analysis of related databases, 39093-93-1, the application of this compound in the production field has become more and more popular.

Reference£º
Patent; Stachel, Shawn; Paone, Daniel V.; Li, Jing; Nanda, Kausik; US2015/99719; (2015); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39093-93-1, name is Thiomorpholine 1,1-dioxide. A new synthetic method of this compound is introduced below. 39093-93-1

Step 1: 2-bromo-5-iodopyridine (1.24 g, 4.35 mmol), thiomorpholine-1,1-dioxide (882 mg, 6.53 mmol) and NaOtBu (1 .04 g, 10.87 mmol) were charged to a screw cap tube, dry toluene (25 mL) was added and the mixture was degassed by nitrogen bubbling for 5 mm. Then XantPhos (250 mg, 0.44 mmol) and Pd2(dba)3 (200 mg, 0.22 mmol) were incorporated and the tube was closed under nitrogen atmosphere. The reaction mixture was stirred at rt for 4 days. EtOAc and water were added. The phases were separated. The organic layer was dried over Mg504, filtered and the solution was concentrated to dryness. The crude material was absorbed on silica gel and purified by column chromatography eluting with CH2CI2 and a gradient of CH2CI2/MeOH from [100:0] to [95:5]. The product fractions were combined and concentrated to dryness to afford 4-(6-bromopyridin-3-yl)-1-thiomorpholine-1 ,1-dione Ex.36a (730 mg, 57percent) as yellow solid.

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 39093-93-1, we look forward to future research findings about .

Reference£º
Patent; GENFIT; DELHOMEL, Jean-Francois; PERSPICACE, Enrico; MAJD, Zouher; PARROCHE, Peggy; WALCZAK, Robert; BONNET, Pascal; FOGHA, Jade; (144 pag.)WO2018/138359; (2018); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 76176-87-9, name is Thiomorpholine-1-oxide hydrochloride. A new synthetic method of this compound is introduced below. 76176-87-9

To the stirred solution of 3-(4-amino-5-iodo-pyrrolo[2,3-d]pyrimidin-7-yl)-cyclobutanone (Intermediate BG; 680 mg, 2.05 mmol), 1.2-dichloroethane (55 ml) and diisopropylethylamine (1.79 ml, 10.25 mmol) was subsequently added 1-oxo-thiomorpholine hydrochloride (638 mg, 4.10 mmol) and sodium triacetoxyborohydride (652 mg, 3.08 mmol) at 0 C. The reaction mixture was stirred for 1 h at room temperature and then poured into the stirred mixture of water (150 ml) and EtOAc (150 ml). The precipitate was filtered and washed with water and EtOAc. The solid collected was dried in vacuo to afford the title compound as beige crystals. HPLC-MS: M+H = 432.1 (R, = 0.43); TLC; Rf = 0 36 (DCM/MeOH/NH3aq, 200:20:1).

While traditionally a conservative industry, chemical producers will need to modernize their PR strategies to stay relevant. 76176-87-9, we look forward to future research findings about .

Reference£º
Patent; NOVARTIS AG; IRM LLC; CHEN, Bei; FAIRHURST, Robin, Alec; FLOERSHEIMER, Andreas; FURET, Pascal; GUAGNANO, Vito; JIANG, Songchun; LU, Wenshuo; MARSILJE, Thomas, H.; MCCARTHY, Clive; MICHELLYS, Pierre-Yves; STAUFFER, Frederic; STUTZ, Stefan; VAUPEL, Andrea; WO2011/29915; (2011); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

Adding a certain compound to certain chemical reactions, such as: Thiomorpholine 1,1-dioxide, cas is 39093-93-1,the Thiomorpholine compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 39093-93-1,the Thiomorpholine, compound., 39093-93-1

To a solution of (E)-3-((lR,3aR,5aR,5bR,7aR,l laS,l lbR,13aR,13bR)-9-(4-(tert- butoxycarbonyl)phenyl)-5a,5b,8,8, 11 a-pentamethyl- 1 -(prop- l-en-2-yl)- 2,3,3a,4,5,5a,5b,6,7,7a,8,l l,l la,l lb,12,13,13a,13b-octadecahydro-lH- cyclopenta[a]chrysen-3a-yl)acrylic acid (100 mg, 0.16 mmol) and thiomorpholine 1,1- dioxide (25 mg, 0.19 mmol) in CH2CI2 (5 mL) was added DIPEA (0.14 mL, 0.78 mmol) followed by HATU (89 mg, 0.23 mmol). The solution was stirred at RT for 1 h. The reaction mixture was concentrated under reduced pressure. The crude mixture was purified on silica gel to give the title compound (115 mg, 97percent) as a solid. MS: m/e 758.6 (M+H)+, 2.80 min (method 1). XH NMR (400MHz, CHLOROFORM-d) delta 7.89 (d, J=8.3 Hz, 2H), 7.29 (d, J=14.3 Hz, IH), 7.17 (d, J=8.3 Hz, 2H), 6.31 (d, J=15.6 Hz, IH), 5.28 (d, J=4.5 Hz, IH), 4.74 (s, IH), 4.64 (s, IH), 4.20 – 4.04 (m, 4H), 3.17 – 3.01 (m, 4H), 2.57 (dt, J=l l. l, 5.9 Hz, IH), 2.10 (dd, J=l 7.2, 6.4 Hz, IH), 1.96 – 0.85 (m, 21H), 1.72 (s, 3H), 1.60 (s, 9H), 1.03 (s, 3H), 1.02 (s, 3H), 0.97 (s, 3H), 0.92 (s, 6H).

If you are interested in these compounds, 39093-93-1, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; SIT, Sing-Yuen; CHEN, Jie; CHEN, Yan; SWIDORSKI, Jacob; REGUEIRO-REN, Alicia; MEANWELL, Nicholas A.; (109 pag.)WO2016/77572; (2016); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact.128453-98-5, 4-(tert-Butoxycarbonyl)thiomorpholine-3-carboxylic acid it is a common compound, a new synthetic route is introduced below., 128453-98-5

To a solution of N-Boc thiomorpholine carboxylic acid (1.36 g, 5.51 mmol) in dichloromethane (13.6 ml) were added under N2, at r.t., TBTU (1.95 g, 6.06 mmol) and DIPEA (1.92 ml, 11.02 mmol) and the solution was stirred for 30 mins. To a suspension of L-serine methyl ester hydrochloride (1.71 g, 11.02 mmol) in dichloromethane (13.6 ml) was added DIPEA (1.92 ml, 11.02 mmol) and the resulting solution was stirred for 30 mins. Then the solution containing the serine free base was added to the reaction mixture and it was left stirring for 16 hrs. Water was added to the reaction mixture and the aqueous layer was extracted with dichloromethane (x3) and the combined organic phases were dried (Na2SO4) and evaporated to dryness. The crude title compound (3.87 g) was used in the next step without further purification. UPLC/MS: m/z= 371 (M+Na); 349 (M+1 ); 293 (M-fBu); 249 (M-BOC+1 ) (at) t=0.59 min

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 128453-98-5, and friends who are interested can also refer to it.

Reference£º
Patent; SMITHKLINE BEECHAM CORPORATION; WO2007/28654; (2007); A1;,
Thiomorpholine – Wikipedia
Thiomorpholine | C4H9NS – PubChem