Month: April 2022

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Radical Yields in the Radiolysis of Branched Hydrocarbons: Tertiary C-H Bond Rupture in 2,3-Dimethylbutane, 2,4-Dimethylpentane, and 3-Ethylpentane, published in 2003-10-30, which mentions a compound: 616-14-8, mainly applied to radiolysis branched hydrocarbon tertiary carbon hydrogen bond rupture, Computed Properties of C5H11I.

Gel permeation chromatog. has been applied to iodine scavenging studies of the distribution of radicals produced in the radiolysis of sym. branched hydrocarbons 2,3-dimethylbutane, 2,4-dimethylpentane, and 3-ethylpentane. The principal iodides observed are those expected as a result of simple bond rupture. In the case of 2,3-dimethylbutane all five expected iodides are readily resolvable and it is shown that the loss of H from a tertiary position is favored over loss from a primary position by a factor of ∼10. A similar ratio is also observed for 2,4-dimethylpentane. The higher ratio of 15 observed for 3-ethylpentane indicates a dependence on the number of tertiary sites on the alkane. The relative yield of ∼3.3 for the loss of secondary and primary H atoms from 2,4-dimethylpentane and 3-ethylpentane is similar to that for normal alkanes, indicating a negligible effect of the adjacent tertiary carbon. In all three cases the rupture of terminal C-C bonds is relatively infrequent with C-C rupture occurring preferentially at the bonds adjacent to the tertiary carbon.

This literature about this compound(616-14-8)Computed Properties of C5H11Ihas given us a lot of inspiration, and I hope that the research on this compound(1-Iodo-2-methylbutane) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Thiomorpholine – Wikipedia,
Thiomorpholine | C4H9NS – PubChem

Olah, George A.; Welch, John published an article about the compound: 1-Iodo-2-methylbutane( cas:616-14-8,SMILESS:CCC(CI)C ).Safety of 1-Iodo-2-methylbutane. Aromatic heterocyclic compounds can be classified according to the number of heteroatoms or the size of the ring. The authors also want to convey more information about this compound (cas:616-14-8) through the article.

Thirty-nine RX (R = C4-8 alkyl, cyclopentyl, cyclohexyl, adamantyl, norbornyl, PhCH2; X = F, Cl, Br, I) were prepared by reaction of the corresponding ROH with MX (M = Na, K, NH4) in polyhydrogen fluoridepyridine. Thus, BuCH2OH was kept 1 hr with 70% HF-pyridine containing NaCl to give 89% BuCH2Cl.

This literature about this compound(616-14-8)Safety of 1-Iodo-2-methylbutanehas given us a lot of inspiration, and I hope that the research on this compound(1-Iodo-2-methylbutane) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Thiomorpholine – Wikipedia,
Thiomorpholine | C4H9NS – PubChem

Application In Synthesis of 1-Iodo-2-methylbutane. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 1-Iodo-2-methylbutane, is researched, Molecular C5H11I, CAS is 616-14-8, about Diphosphorus tetraiodide (P2I4). A valuable reagent for regioselective synthesis of iodo alkanes from alcohols. Author is Lauwers, M.; Regnier, B.; Van Eenoo, M.; Denis, J. N.; Krief, A..

Primary, secondary, and tertiary alkanols and phenylalkanols and secondary and tertiary cycloalkanols were converted in high yields to the resp. alkyl, phenylalkyl, and cycloalkyl iodides by P2I4 in CS2 and at 20°. E.g., ROH [R = Me(CH2)7, Ph(CH2)2, cyclopentyl] gave 80-8% RI in 24 h.

This literature about this compound(616-14-8)Application In Synthesis of 1-Iodo-2-methylbutanehas given us a lot of inspiration, and I hope that the research on this compound(1-Iodo-2-methylbutane) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Thiomorpholine – Wikipedia,
Thiomorpholine | C4H9NS – PubChem

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Primary active amyl halides》. Authors are Whitmore, Frank C.; Olewine, J. Harris.The article about the compound:1-Iodo-2-methylbutanecas:616-14-8,SMILESS:CCC(CI)C).Reference of 1-Iodo-2-methylbutane. Through the article, more information about this compound (cas:616-14-8) is conveyed.

Primary active AmOH (I) with SOCl2 in C5H5N give 77% of the AmCl, b140 50.5-1°, nD20 1.4125, n420 0.8852, [α]D28.5 1.66°. I and PBr3 at 5-15° give 29% of the AmBr, b140 69.6°, nD20 1.4450, d420 1.2239, [α]D25 3.75°. I and BzCl give 80% of the benzoate, b20 140.2°, nD20 1.4948, d420 0.9913, [α]D28 6.09°; with MeMgI this yields 17.5% of the AmI, b20 47.1°, nD20 1.4969, d42 1.5227, [α]D28 4.84°. Data are given for the constants of I after regeneration from the chloride or bromide through the Grignard reagents; the total racemization in the steps I → AmCl or AmBr → Grignard reagent → I is not over 10%.

This literature about this compound(616-14-8)Reference of 1-Iodo-2-methylbutanehas given us a lot of inspiration, and I hope that the research on this compound(1-Iodo-2-methylbutane) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Thiomorpholine – Wikipedia,
Thiomorpholine | C4H9NS – PubChem

Category: thiomorpholine. The reaction of aromatic heterocyclic molecules with protons is called protonation. Aromatic heterocycles are more basic than benzene due to the participation of heteroatoms. Compound: 1-Iodo-2-methylbutane, is researched, Molecular C5H11I, CAS is 616-14-8, about Gas chromatography of alkyl iodides. II. Influence of structure on retention time and sensitivity to electron capture detector. Author is Castello, Gianrico; D’Amato, Giuseppina.

The retention times and indexes observed for 34 alkyl iodides during electron-capture gas-liquid chromatog. on a 15% tricresyl phosphate/Chromosorb W (DMCS-treated)column are examined as functions of the number of C atoms, the I position, and the number and position of branchings in the alkyl iodide mols. The relative molar response of the electron-capture detector is useful for detector standardizations since it depends only on the standing current.

This literature about this compound(616-14-8)Category: thiomorpholinehas given us a lot of inspiration, and I hope that the research on this compound(1-Iodo-2-methylbutane) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Thiomorpholine – Wikipedia,
Thiomorpholine | C4H9NS – PubChem

The reaction of an aromatic heterocycle with a proton is called a protonation. One of articles about this theory is 《Optical rotation and atomic dimension for the four optically active 1-halo-2-methylbutanes》. Authors are Brauns, Dirk H..The article about the compound:1-Iodo-2-methylbutanecas:616-14-8,SMILESS:CCC(CI)C).Recommanded Product: 616-14-8. Through the article, more information about this compound (cas:616-14-8) is conveyed.

cf. C. A. 25, 2977. Detailed directions are given for the preparation of pure 2-methyl-1-butanol (I) and its F, Cl, Br and I derivatives. The following properties are described: I b. 128°, b50 65.7°, d420 0.8193, nD20 1.4107, sp. rotation for λ 5892.5 A. -5.756, for 5461 A. -6.835, for 5850 A. -5.78. The last 3 values were taken at about 20°. The corresponding values for the derivatives are: for 1-fluoro-2-methylbutane 55.9°, -, 0.7906, 1.3576, -8.865, -10.477, -8.87; for 1-chloro-2-methylbutane 100.45°, 27.7°, 0.8857, 1.4124, +1.644, +1.847, +1.68; for 1-bromo-2-methylbutane 121.6°, 45.0°, 1.2234, 1.4451, +4.043, +4.707, +4.09; and for 1-iodo-2-methylbutane -, 66.5°, 1.5253, 1.4977, +5.685, +6.626, +5.71. The differences in mol. rotation (Cl-F), (Br-Cl) and (I-Br) have the ratio 41:18:21.6, which agrees with the ratio of the differences of the radii of the respective neutral atoms.

This literature about this compound(616-14-8)Recommanded Product: 616-14-8has given us a lot of inspiration, and I hope that the research on this compound(1-Iodo-2-methylbutane) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Thiomorpholine – Wikipedia,
Thiomorpholine | C4H9NS – PubChem

Poh, Bo-Long published an article about the compound: 1-Iodo-2-methylbutane( cas:616-14-8,SMILESS:CCC(CI)C ).Quality Control of 1-Iodo-2-methylbutane. Aromatic heterocyclic compounds can be classified according to the number of heteroatoms or the size of the ring. The authors also want to convey more information about this compound (cas:616-14-8) through the article.

For the empirical equations [M]D = mΣ RD + I; [M]D is the mol. rotation, ΣRD is the sum of bond refractions, and m and I are constants for a given series of compounds, a different treatment of the term ΣRD extends the usefulness of the equation to all types of substituents, not just monovalent and linear substituents.

This literature about this compound(616-14-8)Quality Control of 1-Iodo-2-methylbutanehas given us a lot of inspiration, and I hope that the research on this compound(1-Iodo-2-methylbutane) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Thiomorpholine – Wikipedia,
Thiomorpholine | C4H9NS – PubChem

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Synthetic methods and reactions. 63. Pyridinium poly(hydrogen fluoride) (30% pyridine-70% hydrogen fluoride): a convenient reagent for organic fluorination reactions, published in 1979, which mentions a compound: 616-14-8, mainly applied to fluorination pyridinium polyhydrogen fluoride; diazotization fluorination; safety pyridinium polyhydrogen fluoride, Application In Synthesis of 1-Iodo-2-methylbutane.

Pyridinium polyhydrogen fluoride (30% pyridine-70% HF) reagent, a stabilized, less-volatile form of HF, is a convenient and effective fluorinating agent. Fluorination, halofluorination, nitrofluorination, and hydrofluorination of olefins were achieved using the reagent. The in situ diazotization and subsequent fluorinative dediazonization of α-amino acids, aminoarenes, and carbamates yielded α-fluorocarboxylic acids, aryl fluorides, and fluoroformates, resp. Geminal dihalides and α-halo ketones were treated with HgO in pyridinium polyhydrogen fluoride to form geminal difluorides and α-fluoro ketones. Solutions of alkali halides in pyridinium polyhydrogen fluoride were also effective halogenating agents for aminoarenes, via in situ diazotization and subsequent nucleophilic dediazonization by the corresponding halides, as well as for alcs., via SN2 displacement reactions. Diazo ketones and diazoalkanes also reacted smoothly with halide ions in pyridinium polyhydrogen fluoride solution to give the corresponding geminally halofluorinated compounds Proper precautions must be observed in using pyridinium polyhydrogen fluoride.

This literature about this compound(616-14-8)Application In Synthesis of 1-Iodo-2-methylbutanehas given us a lot of inspiration, and I hope that the research on this compound(1-Iodo-2-methylbutane) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Thiomorpholine – Wikipedia,
Thiomorpholine | C4H9NS – PubChem

Safety of 1-Iodo-2-methylbutane. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: 1-Iodo-2-methylbutane, is researched, Molecular C5H11I, CAS is 616-14-8, about On labelling with generator nuclides. Author is Otto, R.; Hecht, P..

Short-lived radioisotopes separated from radionuclide generators are widely used. Possibilities of labeling with the daughter nuclides of the com. available Mo/Tc-, Sn/In-, and Te/I-generators and of the self-made Ba/La-generator in industrial tracer experiments are presented. The transfer of the daughter nuclides from the generator eluates into organic phases and the labeling of oil-phases and solid particles are investigated. The developed simple, quick and efficient methods are suitable for routine application under industrial conditions. Some examples of industrial applications of the generator nuclides are given, too.

This literature about this compound(616-14-8)Safety of 1-Iodo-2-methylbutanehas given us a lot of inspiration, and I hope that the research on this compound(1-Iodo-2-methylbutane) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Thiomorpholine – Wikipedia,
Thiomorpholine | C4H9NS – PubChem

Heterocyclic compounds can be divided into two categories: alicyclic heterocycles and aromatic heterocycles. Compounds whose heterocycles in the molecular skeleton cannot reflect aromaticity are called alicyclic heterocyclic compounds. Compound: 616-14-8, is researched, Molecular C5H11I, about Diphosphorus tetraiodide (P2I4). A valuable reagent for regioselective synthesis of iodo alkanes from alcohols, the main research direction is iodide alkyl phenylalkyl cycloalkyl; alc substitution reaction diphosphorus tetraiodide.HPLC of Formula: 616-14-8.

Primary, secondary, and tertiary alkanols and phenylalkanols and secondary and tertiary cycloalkanols were converted in high yields to the resp. alkyl, phenylalkyl, and cycloalkyl iodides by P2I4 in CS2 and at 20°. E.g., ROH [R = Me(CH2)7, Ph(CH2)2, cyclopentyl] gave 80-8% RI in 24 h.

This literature about this compound(616-14-8)HPLC of Formula: 616-14-8has given us a lot of inspiration, and I hope that the research on this compound(1-Iodo-2-methylbutane) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Thiomorpholine – Wikipedia,
Thiomorpholine | C4H9NS – PubChem